Reset ENET_RST_B to make ENET function stable.
Since DM_GPIO enabled, we use "gpio_spi@0_5" which corresponds
to ENET_RST_B.
Signed-off-by: Peng Fan <peng....@nxp.com>
Cc: Stefano Babic <sba...@denx.de>
---
V2:
None
board/freescale/mx7dsabresd/mx7dsabresd.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c
b/board/freescale/mx7dsabresd/mx7dsabresd.c
index d6ba364..f7a5f0d 100644
--- a/board/freescale/mx7dsabresd/mx7dsabresd.c
+++ b/board/freescale/mx7dsabresd/mx7dsabresd.c
@@ -232,6 +232,23 @@ int mmc_map_to_kernel_blk(int dev_no)
int board_eth_init(bd_t *bis)
{
int ret;
+ unsigned int gpio;
+
+ ret = gpio_lookup_name("gpio_spi@0_5", NULL, NULL, &gpio);
+ if (ret) {
+ printf("GPIO: 'gpio_spi@0_5' not found\n");
+ return -ENODEV;
+ }
+
+ ret = gpio_request(gpio, "fec_rst");
+ if (ret && ret != -EBUSY) {
+ printf("gpio: requesting pin %u failed\n", gpio);
+ return ret;
+ }
+
+ gpio_direction_output(gpio, 0);
+ udelay(500);
+ gpio_direction_output(gpio, 1);
setup_iomux_fec();
--
2.6.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
