Stefano, This patchset has been on the ML for a quite a while, any chance to get this still into v2017.05?
-- Stefan On 2017-04-10 22:42, Sanchayan Maity wrote: > Hello, > > This patchset adds support for the Freescale/NXP Display Controller Unit > (DCU4) > for Vybrid which is found on the LS1021A and Vybrid SoC. > > Patch series is based on top of latest u-boot master. > > First patch in the series renames existing CONFIG_FSL_DCU_FB to > CONFIG_VIDEO_FSL_DCU_FB and then converts it to Kconfig. All board defconfigs > affected by this patch have been compile tested. > > Patch 2-5 introduce incremental changes for supporting DCU on Vybrid. > > Patch 6 in the series adds DCU support to Vybrid and has been tested on > Toradex Colibri VF61 module. > > Will appreciate it if the maintainers or users of LS1021 SoC can test this to > check and report regressions if any. > > Changes since v2: > 1. Rebase on top of latest u-boot master > 2. Drop the fourth patch in earlier series and replace it with a fix for > DCU_MODE_BLEND_ITER and use the existing DCU_LAYER_MAX_NUM instead of > introducing DCU_TOTAL_LAYER_NUM as earlier incoporating Stefan's feedback. > > Changes since v1: > 1. Rebase of top of latest u-boot master > 2. Fix a bug present in v1 patch series which resulted in noisy screen when > switching from u-boot to Linux. Patch fixed is second in this series. > > v1: > https://lists.denx.de/pipermail/u-boot/2017-February/280281.html > > v2: > https://www.mail-archive.com/u-boot@lists.denx.de/msg243132.html > > Thanks & Regards, > Sanchayan. > > Sanchayan Maity (1): > Convert CONFIG_FSL_DCU_FB to Kconfig > > Stefan Agner (5): > video: fsl_dcu_fb: fix framebuffer to the end of memory > video: fsl_dcu_fb: Enable pixel clock after initialization > video: fsl_dcu_fb: Fix DCU_MODE_BLEND_ITER setting > video: fsl_dcu_fb: add additional modes for DCU > board: toradex: colibri_vf: Add DCU support for Colibri Vybrid > > arch/arm/cpu/armv7/ls102xa/soc.c | 2 +- > arch/arm/include/asm/arch-vf610/crm_regs.h | 14 +++ > arch/arm/include/asm/arch-vf610/imx-regs.h | 2 + > arch/arm/include/asm/arch-vf610/iomux-vf610.h | 31 ++++++ > arch/arm/include/asm/imx-common/iomux-v3.h | 3 + > board/freescale/ls1021aiot/Makefile | 2 +- > board/freescale/ls1021aqds/Makefile | 2 +- > board/freescale/ls1021atwr/Makefile | 2 +- > board/toradex/colibri_vf/Makefile | 1 + > board/toradex/colibri_vf/colibri_vf.c | 76 ++++++++++--- > board/toradex/colibri_vf/dcu.c | 38 +++++++ > configs/colibri_vf_defconfig | 4 + > configs/ls1021aqds_ddr4_nor_defconfig | 1 + > configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 1 + > configs/ls1021aqds_nand_defconfig | 1 + > configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 1 + > configs/ls1021aqds_nor_defconfig | 1 + > configs/ls1021aqds_nor_lpuart_defconfig | 1 + > configs/ls1021aqds_qspi_defconfig | 1 + > configs/ls1021aqds_sdcard_ifc_defconfig | 1 + > configs/ls1021aqds_sdcard_qspi_defconfig | 1 + > configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 1 + > configs/ls1021atwr_nor_defconfig | 1 + > configs/ls1021atwr_nor_lpuart_defconfig | 1 + > configs/ls1021atwr_qspi_defconfig | 1 + > .../ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 1 + > configs/ls1021atwr_sdcard_ifc_defconfig | 1 + > configs/ls1021atwr_sdcard_qspi_defconfig | 1 + > drivers/video/Kconfig | 15 +++ > drivers/video/Makefile | 2 +- > drivers/video/fsl_dcu_fb.c | 121 > ++++++++++++++++++--- > include/configs/colibri_vf.h | 13 +++ > include/configs/ls1021aqds.h | 4 +- > include/configs/ls1021atwr.h | 4 +- > include/fsl_dcu_fb.h | 1 + > scripts/config_whitelist.txt | 1 - > 36 files changed, 313 insertions(+), 41 deletions(-) > create mode 100644 board/toradex/colibri_vf/dcu.c _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
