Am 10.04.2017 um 21:03 schrieb felix zihlmann:
> Hi,
> 
> I have tried this patch-set (applied to u-boot-2017.03) on a Odroid-C2.
> Booting from SD card works fine. However booting form eMMC card (128GB
> from Hardkernel) produces the following error:
> 
> => fatload mmc 0:1 ${initrd_loadaddr} ${initrdfile}
> Card did not respond to voltage select!
> mmc_init: -95, time 9
> ** Bad device mmc 0 **

mmc 0 is the SD slot. When doing "mmc list" you should see:

=> mmc list
mmc@72000: 0
mmc@74000: 1 (eMMC)

So you have to do "fatload mmc 1:1 ......."

Heiner

> Setting max-frequency to 60MHz does not help.
> 
> Booting from the eMMC card using the Hardkernel u-boot and the
> Hardkernel kernel works fine.
> 
> Thanks!
> 
> Felix
> 
> 

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to