From: Jagan Teki <ja...@amarulasolutions.com> Add devicetree support for imx6q_sabresd non-spl board.
Cc: Stefano Babic <sba...@denx.de> Cc: Fabio Estevam <fabio.este...@nxp.com> Cc: Michael Trimarchi <mich...@amarulasolutions.com> Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> --- Changes for v4: - Newly added configs/imx6q_sabresd_defconfig | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/configs/imx6q_sabresd_defconfig b/configs/imx6q_sabresd_defconfig index e9758e3..6455577 100644 --- a/configs/imx6q_sabresd_defconfig +++ b/configs/imx6q_sabresd_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_TARGET_MX6SABRESD=y CONFIG_VIDEO=y +CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabresd" CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q" CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set @@ -44,5 +45,18 @@ CONFIG_G_DNL_VENDOR_NUM=0x0525 CONFIG_G_DNL_PRODUCT_NUM=0xa4a5 # CONFIG_VIDEO_SW_CURSOR is not set CONFIG_OF_LIBFDT=y +CONFIG_OF_CONTROL=y +CONFIG_DM_ETH=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y +CONFIG_DM_MMC=y +CONFIG_DM_PMIC=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_USB=y +# CONFIG_BLK is not set +# CONFIG_DM_MMC_OPS is not set +CONFIG_DM_PMIC_PFUZE100=y CONFIG_SYS_I2C_MXC=y CONFIG_FEC_MXC=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
