2017年3月29日 19:17于 Andre Przywara <andre.przyw...@arm.com>写道： > > Hi, > > On 29/03/17 07:57, Maxime Ripard wrote: > > On Tue, Mar 28, 2017 at 01:45:22AM +0100, Andre Przywara wrote: > >> The Pine64 (and all other 64-bit Allwinner boards) need to load an > >> ARM Trusted Firmware image beside the actual U-Boot proper. > >> This can now be easily achieved by using the just extended SPL FIT > >> loading support, so enable it in the Pine64 defconfig. > >> Also add the FIT image as a build target to 64-bit sunxi board to > >> trigger the respective Makefile rules. > >> > >> Signed-off-by: Andre Przywara <andre.przyw...@arm.com> > >> --- > >> configs/pine64_plus_defconfig | 6 ++++++ > >> include/configs/sunxi-common.h | 4 ++++ > >> 2 files changed, 10 insertions(+) > >> > >> diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig > >> index 92bda60..8a90579 100644 > >> --- a/configs/pine64_plus_defconfig > >> +++ b/configs/pine64_plus_defconfig > >> @@ -3,9 +3,14 @@ CONFIG_ARCH_SUNXI=y > >> CONFIG_MACH_SUN50I=y > >> CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y > >> CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus" > >> +CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus" > >> # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > >> CONFIG_CONSOLE_MUX=y > >> CONFIG_SPL=y > >> +CONFIG_FIT=y > >> +CONFIG_SPL_FIT=y > >> +CONFIG_SPL_LOAD_FIT=y > >> +CONFIG_SPL_OF_LIBFDT=y > > > > Again, this doesn't make any sense to enable it in *all* our > > defconfigs. If this is something that should be enabled by default for > > the A64 support, then do so in Kconfig directly. > > Oh sorry, I think I completely misunderstood you last time. > Indeed this makes sense, especially with more defconfigs for A64/H5 > boards coming up. > > I will think about a solution that makes Icenowy happy as well, > something like BOARD_NEEDS_SPL_FIT or so - though a simple "select" > sounds tempting ;-)
In fact I don't need an environment without ATF. I just mentioned the possibility ;-) > > Cheers, > Andre. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
