On Tue, Apr 4, 2017 at 1:43 PM, Jagan Teki <jagannadh.t...@gmail.com> wrote:
> Full Log:
> ----------
> boards.cfg is up to date. Nothing to do.
> Summary of 36 commits for 1275 boards (12 threads, 1 job per thread)
> 01: sunxi: fix ACTLR.SMP assembly routine
> aarch64: + orangepi_pc2
> blackfin: + cm-bf561 blackstamp bf527-ezkit-v2 br4 cm-bf527
> bf506f-ezkit ip04 bf527-sdp bf527-ad7160-eval bf609-ezkit tcm-bf518
> bf527-ezkit bf533-ezkit ibf-dsp561 bf537-minotaur bf537-pnav
> bf537-srv1 cm-bf548 bf548-ezkit bf525-ucr2 blackvme pr1 bf518f-ezbrd
> bf526-ezbrd
> x86: + galileo conga-qeval20-qa3-e3845-internal-uart
> qemu-x86_64 conga-qeval20-qa3-e3845 bayleybay
> theadorable-x86-dfi-bt700 qemu-x86_efi_payload64 minnowmax
> dfi-bt700-q7x-151 som-db5800-som-6867 chromebook_link64
> arm: + CHIP_pro sun8i_a23_evb nanopi_neo_air Sunchip_CX-A99
> mx6sxsabreauto
> +/bin/sh: 1: bfin-uclinux-ldr: not found
> +make[1]: *** [u-boot.ldr] Error 127
> +make: *** [sub-make] Error 2
> +make[1]: bfin-uclinux-ldr: Command not found
> +/bin/sh: 1: iasl: not found
> +mv: cannot stat '../board/intel/galileo/dsdt.hex': No such file or directory
> +make[2]: *** [board/intel/galileo/dsdt.c] Error 1
> +make[1]: *** [board/intel/galileo] Error 2
> + if (i2c_read(chip, addr, 1, &valb, 1))
> + ^
> + return i2c_write(chip, addr, 1, &valb, 1);
> +cc1: error: -mcpu=bf506-0.0 is not valid
> +cc1: error: unrecognized command line option '-mcpu=bf506-0.0'
> +make[2]: *** [u-boot.cfg] Error 1
> +make[1]: *** No rule to make target `include/config/auto.conf',
> needed by `include/config/uboot.release'. Stop.
> +cc1: error: -mcpu=bf609-0.0 is not valid
> +cc1: error: unrecognized command line option '-mcpu=bf609-0.0'
> +mv: cannot stat '../board/congatec/conga-qeval20-qa3-e3845/dsdt.hex':
> No such file or directory
> +make[2]: *** [board/congatec/conga-qeval20-qa3-e3845/dsdt.c] Error 1
> +make[1]: *** [board/congatec/conga-qeval20-qa3-e3845] Error 2
Toolchain issues?
> +make[2]: *** [orangepi_pc2_defconfig] Error 1
> +make[1]: *** [orangepi_pc2_defconfig] Error 2
> +make[2]: *** [CHIP_pro_defconfig] Error 1
> +make[1]: *** [CHIP_pro_defconfig] Error 2
New boards introduced not available at the start of the series.
> +mv: cannot stat '../board/dfi/dfi-bt700/dsdt.hex': No such file or directory
> +make[2]: *** [board/dfi/dfi-bt700/dsdt.c] Error 1
> +make[1]: *** [board/dfi/dfi-bt700] Error 2
> +In file included from ../arch/x86/include/asm/bitops.h:18:0,
> + from ../include/linux/bitops.h:123,
> + from ../include/common.h:25,
> + from ../lib/asm-offsets.c:15:
> + if (!(word & (~0ul << 32))) {
> + ^
> + word <<= 32;
> + if (!(word & (~0ul << (BITS_PER_LONG-16)))) {
> + if (!(word & (~0ul << (BITS_PER_LONG-8)))) {
> + if (!(word & (~0ul << (BITS_PER_LONG-4)))) {
> + if (!(word & (~0ul << (BITS_PER_LONG-2)))) {
> + if (!(word & (~0ul << (BITS_PER_LONG-1))))
> + from ../arch/x86/lib/asm-offsets.c:15:
> + from ../arch/x86/cpu/cpu.c:22:
> + from ../arch/x86/cpu/cpu_x86.c:7:
> + from ../arch/x86/cpu/intel_common/cpu.c:7:
> + from ../arch/x86/cpu/intel_common/lpc.c:7:
> + from ../arch/x86/cpu/intel_common/microcode.c:10:
> +../arch/x86/cpu/intel_common/microcode.c: In function 'microcode_read_rev':
> +../arch/x86/cpu/intel_common/microcode.c:79:2: error: PIC register
> clobbered by 'ebx' in 'asm'
> + asm volatile (
> +make[3]: *** [arch/x86/cpu/intel_common/microcode.o] Error 1
> +make[2]: *** [arch/x86/cpu/intel_common] Error 2
> +make[1]: *** [arch/x86/cpu] Error 2
> +mv: cannot stat '../board/intel/bayleybay/dsdt.hex': No such file or
> directory
> +make[2]: *** [board/intel/bayleybay/dsdt.c] Error 1
> +make[1]: *** [board/intel/bayleybay] Error 2
> +make[2]: *** [sun8i_a23_evb_defconfig] Error 1
> +make[1]: *** [sun8i_a23_evb_defconfig] Error 2
> +../arch/x86/lib/crt0_x86_64_efi.S: Assembler messages:
> +../arch/x86/lib/crt0_x86_64_efi.S:16: Error: bad register name `%rsp'
> +../arch/x86/lib/crt0_x86_64_efi.S:17: Error: bad register name `%rcx'
> +../arch/x86/lib/crt0_x86_64_efi.S:18: Error: bad register name `%rdx'
> +../arch/x86/lib/crt0_x86_64_efi.S:21: Error: bad register name `%rip)'
> +../arch/x86/lib/crt0_x86_64_efi.S:22: Error: bad register name `%rip)'
> +../arch/x86/lib/crt0_x86_64_efi.S:24: Error: bad register name `%rcx'
> +../arch/x86/lib/crt0_x86_64_efi.S:25: Error: bad register name `%rdx'
> +../arch/x86/lib/crt0_x86_64_efi.S:26: Error: bad register name `%rcx'
> +../arch/x86/lib/crt0_x86_64_efi.S:27: Error: bad register name `%rdx'
> +../arch/x86/lib/crt0_x86_64_efi.S:30: Error: bad register name `%rdi'
> +../arch/x86/lib/crt0_x86_64_efi.S:31: Error: bad register name `%rsi'
> +../arch/x86/lib/crt0_x86_64_efi.S:34: Error: bad register name `%rsp'
> +../arch/x86/lib/crt0_x86_64_efi.S:47: Warning: setting incorrect
> section attributes for .reloc
> +make[2]: *** [arch/x86/lib/crt0_x86_64_efi.o] Error 1
> +make[1]: *** [arch/x86/lib] Error 2
> +make[2]: *** [Sunchip_CX-A99_defconfig] Error 1
> +make[1]: *** [Sunchip_CX-A99_defconfig] Error 2
> +make[2]: *** [nanopi_neo_air_defconfig] Error 1
> +make[1]: *** [nanopi_neo_air_defconfig] Error 2
> +mv: cannot stat '../board/intel/minnowmax/dsdt.hex': No such file or
> directory
> +make[2]: *** [board/intel/minnowmax/dsdt.c] Error 1
> +make[1]: *** [board/intel/minnowmax] Error 2
The above seem like existing errors completely unrelated that are completely
unrelated to the series you're testing, especially since the first patch
here is sunxi specific.
> +mv: cannot stat '../board/advantech/som-db5800-som-6867/dsdt.hex': No
> such file or directory
> +make[2]: *** [board/advantech/som-db5800-som-6867/dsdt.c] Error 1
> +make[1]: *** [board/advantech/som-db5800-som-6867] Error 2
> w+../drivers/gpio/pca953x.c: In function 'pca953x_reg_write':
> w+../drivers/gpio/pca953x.c:68:3: warning: implicit declaration of
> function 'i2c_read' [-Wimplicit-function-declaration]
> w+../drivers/gpio/pca953x.c:74:3: warning: implicit declaration of
> function 'i2c_write' [-Wimplicit-function-declaration]
> w+../drivers/usb/musb/musb_hcd.c: In function 'config_hub_port':
> w+../drivers/usb/musb/musb_hcd.c:405:5: warning: variable 'hub' set
> but not used [-Wunused-but-set-variable]
> w+../drivers/usb/musb/musb_core.c: In function 'musb_configure_ep':
> w+../drivers/usb/musb/musb_core.c:71:6: warning: variable 'idx' set
> but not used [-Wunused-but-set-variable]
> w+../board/bf533-ezkit/flash.c: In function 'read_data':
> w+../board/bf533-ezkit/flash.c:241:6: warning: variable 'iShift' set
> but not used [-Wunused-but-set-variable]
> w+../drivers/net/ax88180.c: In function 'ax88180_mac_reset':
> w+../drivers/net/ax88180.c:132:16: warning: variable 'tmpval' set but
> not used [-Wunused-but-set-variable]
> w+../drivers/net/ax88180.c: In function 'ax88180_recv':
> w+../drivers/net/ax88180.c:577:17: warning: variable 'tmp_regval' set
> but not used [-Wunused-but-set-variable]
> w+../include/asm-generic/bitops/__fls.h: In function '__fls':
> w+../include/asm-generic/bitops/__fls.h:17:2: warning: left shift
> count >= width of type
> w+../include/asm-generic/bitops/__fls.h:19:3: warning: left shift
> count >= width of type
> w+../include/asm-generic/bitops/__fls.h:22:2: warning: left shift
> count >= width of type
> w+../include/asm-generic/bitops/__fls.h:26:2: warning: left shift
> count >= width of type
> w+../include/asm-generic/bitops/__fls.h:30:2: warning: left shift
> count >= width of type
> w+../include/asm-generic/bitops/__fls.h:34:2: warning: left shift
> count >= width of type
> w+../include/asm-generic/bitops/__fls.h:38:2: warning: left shift
> count >= width of type
Same here.
> 02: ARM: rename CONFIG_TIMER_CLK_FREQ to COUNTER_FREQUENCY
> 03: fsl: ls102x: remove redundant GENERIC_TIMER_CLK
> 04: sunxi: simplify ACTLR.SMP bit set #ifdef
> 05: sunxi: configs: merge sun9i and sun50i SPL memory definitions
> 06: sunxi: Kconfig: introduce CONFIG_SUNXI_HIGH_SRAM
> 07: sunxi: provide ARMv8 mem_map for every ARM64 board
> 08: SPI: SPL: sunxi: fix 64-bit build
> 09: sunxi: DRAM: add Allwinner H5 support
> 10: sunxi: prepare for sharing MACH_SUN8I_H3 config symbol
> 11: sunxi: introduce Allwinner H5 config option
> 12: sunxi: Add OrangePi PC 2 initial support
> -make[2]: *** [orangepi_pc2_defconfig] Error 1
> -make[1]: *** [orangepi_pc2_defconfig] Error 2
> +ERROR: File too large!
> +make[2]: *** [spl/sunxi-spl.bin] Error 1
> +make[1]: *** [spl/u-boot-spl] Error 2
> 13: sunxi: add NanoPi NEO Air defconfig
> arm: nanopi_neo_air
> -make[2]: *** [nanopi_neo_air_defconfig] Error 1
> -make[1]: *** [nanopi_neo_air_defconfig] Error 2
> 14: nand: sunxi: Fix modulo by zero error
> 15: bch: Allow to build for the host
> 16: tools: sunxi: Add spl image builder
> 17: common: Move environment choice to Kconfig
> arm: + Nintendo_NES_Classic_Edition CHIP
> +In file included from ../include/common.h:987:0,
> +../include/environment.h:154:19: error: 'CONFIG_ENV_SIZE' undeclared
> here (not in a function)
> + #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE)
> + ^
> +../include/environment.h:162:21: note: in expansion of macro 'ENV_SIZE'
> + unsigned char data[ENV_SIZE]; /* Environment data */
> + ^
> +make[2]: *** [lib/asm-offsets.s] Error 1
> +make[1]: *** [prepare0] Error 2
Known breakage, fixed by "sunxi: Add default environment size",
the second last patch in the current sunxi/master-pr branch.
> 18: cmd: Add Kconfig option for CMD_MTDPARTS and related options
> 19: mtd: ubi: Select RBTREE option from MTD_UBI Kconfig entry
> 20: cmd: Expose a Kconfig option to enable UBIFS commands
> 21: cmd: nand: Expose optional suboptions in Kconfig
> 22: mtd: sunxi: Select the U-Boot location config option
> 23: mtd: sunxi: Change U-Boot offset
> 24: sunxi: Enable UBI and NAND support
> -In file included from ../include/common.h:987:0,
> -../include/environment.h:154:19: error: 'CONFIG_ENV_SIZE' undeclared
> here (not in a function)
> - #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE)
> -../include/environment.h:162:21: note: in expansion of macro 'ENV_SIZE'
> - unsigned char data[ENV_SIZE]; /* Environment data */
> - ^
> -make[2]: *** [lib/asm-offsets.s] Error 1
> -make[1]: *** [prepare0] Error 2
> -ERROR: File too large!
> -make[2]: *** [spl/sunxi-spl.bin] Error 1
> -make[1]: *** [spl/u-boot-spl] Error 2
> +../cmd/nand.c: In function 'set_dev':
> +../cmd/nand.c:118:24: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared
> (first use in this function)
> + if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[dev]) {
> + ^
> +../cmd/nand.c:118:24: note: each undeclared identifier is reported
> only once for each function it appears in
> +../cmd/nand.c: In function 'do_nand':
> +../cmd/nand.c:400:19: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared
> (first use in this function)
> + for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) {
> +../cmd/nand.c: In function 'do_nandboot':
> +../cmd/nand.c:994:24: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared
> (first use in this function)
> + if (idx < 0 || idx >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[idx]) {
> +make[2]: *** [cmd/nand.o] Error 1
> +make[1]: *** [cmd] Error 2
Known breakage, fixed by "cmd: nand: Make the NAND options default to
NAND_SUNXI",
the third last patch in the current sunxi/master-pr branch.
> 25: sunxi: Add the default mtdids and mtdparts to our env
> 26: nand: sunxi: Add options for the SPL NAND configuration
> 27: scripts: sunxi: Build an raw SPL image
> 28: sunxi: Sync GR8 DTS and AXP209 with the kernel
> 29: sunxi: Add support for the CHIP Pro
> arm: CHIP_pro
> -make[2]: *** [CHIP_pro_defconfig] Error 1
> -make[1]: *** [CHIP_pro_defconfig] Error 2
> 30: ARM: dts: sun9i: Add mmc1 pinmux setting
> 31: arm: sunxi: Add Sunchip CX-A99 initial support
> -make[2]: *** [Sunchip_CX-A99_defconfig] Error 1
> -make[1]: *** [Sunchip_CX-A99_defconfig] Error 2
> 32: sunxi: Add boards/sunxi and arch/arm/mach-sunxi to sunxi MAINTAINERS entry
> 33: cmd: ubifs: Add a dependency on CMD_UBI
> 34: cmd: nand: Make the NAND options default to NAND_SUNXI
> arm: Sunchip_CX-A99
> -../cmd/nand.c: In function 'set_dev':
> -../cmd/nand.c:118:24: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared
> (first use in this function)
> - if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[dev]) {
> - ^
> -../cmd/nand.c:118:24: note: each undeclared identifier is reported
> only once for each function it appears in
> -../cmd/nand.c: In function 'do_nand':
> -../cmd/nand.c:400:19: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared
> (first use in this function)
> - for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) {
> -../cmd/nand.c: In function 'do_nandboot':
> -../cmd/nand.c:994:24: error: 'CONFIG_SYS_MAX_NAND_DEVICE' undeclared
> (first use in this function)
> - if (idx < 0 || idx >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[idx]) {
> -make[2]: *** [cmd/nand.o] Error 1
> -make[1]: *** [cmd] Error 2
> +In file included from ../include/common.h:987:0,
> +../include/environment.h:154:19: error: 'CONFIG_ENV_SIZE' undeclared
> here (not in a function)
> + #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE)
> +../include/environment.h:162:21: note: in expansion of macro 'ENV_SIZE'
> + unsigned char data[ENV_SIZE]; /* Environment data */
> + ^
> +make[2]: *** [lib/asm-offsets.s] Error 1
> +make[1]: *** [prepare0] Error 2
> +ERROR: File too large!
> +make[2]: *** [spl/sunxi-spl.bin] Error 1
> +make[1]: *** [spl/u-boot-spl] Error 2
> 35: sunxi: Add default environment size
> arm: Nintendo_NES_Classic_Edition CHIP
> -In file included from ../include/common.h:987:0,
> -../include/environment.h:154:19: error: 'CONFIG_ENV_SIZE' undeclared
> here (not in a function)
> - #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE)
> - ^
> -../include/environment.h:162:21: note: in expansion of macro 'ENV_SIZE'
> - unsigned char data[ENV_SIZE]; /* Environment data */
> - ^
> -make[2]: *** [lib/asm-offsets.s] Error 1
> -make[1]: *** [prepare0] Error 2
> 36: sunxi: Add defconfig for Allwinner A23 EVB
> arm: sun8i_a23_evb
> -make[2]: *** [sun8i_a23_evb_defconfig] Error 1
> -make[1]: *** [sun8i_a23_evb_defconfig] Error 2
At the end the sunxi targets are all buildable. You could squash the fix
patches into the original patches if the intermediate build failures are
of concern.
Regards
ChenYu
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
