From: Thomas Petazzoni <thomas.petazz...@free-electrons.com>
This commit modifies the mvpp2_defaults_set() function to not do the
loopback and FIFO threshold initialization, which are not needed for
PPv2.2.
Signed-off-by: Thomas Petazzoni <thomas.petazz...@free-electrons.com>
Signed-off-by: Stefan Roese <s...@denx.de>
Acked-by: Joe Hershberger <joe.hershber...@ni.com>
---
Changes in v2:
- Added Acked-by from Joe
drivers/net/mvpp2.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
index e5b42b9e66..e75979b37a 100644
--- a/drivers/net/mvpp2.c
+++ b/drivers/net/mvpp2.c
@@ -2755,16 +2755,18 @@ static void mvpp2_defaults_set(struct mvpp2_port *port)
{
int tx_port_num, val, queue, ptxq, lrxq;
- /* Configure port to loopback if needed */
- if (port->flags & MVPP2_F_LOOPBACK)
- mvpp2_port_loopback_set(port);
-
- /* Update TX FIFO MIN Threshold */
- val = readl(port->base + MVPP2_GMAC_PORT_FIFO_CFG_1_REG);
- val &= ~MVPP2_GMAC_TX_FIFO_MIN_TH_ALL_MASK;
- /* Min. TX threshold must be less than minimal packet length */
- val |= MVPP2_GMAC_TX_FIFO_MIN_TH_MASK(64 - 4 - 2);
- writel(val, port->base + MVPP2_GMAC_PORT_FIFO_CFG_1_REG);
+ if (port->priv->hw_version == MVPP21) {
+ /* Configure port to loopback if needed */
+ if (port->flags & MVPP2_F_LOOPBACK)
+ mvpp2_port_loopback_set(port);
+
+ /* Update TX FIFO MIN Threshold */
+ val = readl(port->base + MVPP2_GMAC_PORT_FIFO_CFG_1_REG);
+ val &= ~MVPP2_GMAC_TX_FIFO_MIN_TH_ALL_MASK;
+ /* Min. TX threshold must be less than minimal packet length */
+ val |= MVPP2_GMAC_TX_FIFO_MIN_TH_MASK(64 - 4 - 2);
+ writel(val, port->base + MVPP2_GMAC_PORT_FIFO_CFG_1_REG);
+ }
/* Disable Legacy WRR, Disable EJP, Release from reset */
tx_port_num = mvpp2_egress_port(port);
--
2.12.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
