From: Ken Ma <m...@marvell.com> - When scsi controller acts as a bus, we need to bind its children scsi devices(scsi hdd, cd, dvd, scanner) to their drivers as spi controller binds spi flashes, so scsi-uclass's post bind function calls dm_scan_fdt_dev() to bind scsi subnode devices; - When scsi controller is a Serial Attached SCSI, it can also work as a pure controller as an on-board component on the motherboard, it may has no subnodes in fdt, then dm_scan_fdt_dev() does nothing and has no effect.
Signed-off-by: Ken Ma <m...@marvell.com> Cc: Simon Glass <s...@chromium.org> Cc: Stefan Roese <s...@denx.de> Cc: Michal Simek <michal.si...@xilinx.com> Reviewed-on: http://vgitil04.il.marvell.com:8080/35425 Tested-by: iSoC Platform CI <ykj...@marvell.com> Reviewed-by: Omri Itach <om...@marvell.com> Reviewed-by: Kostya Porotchkin <kos...@marvell.com> --- drivers/block/scsi-uclass.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/block/scsi-uclass.c b/drivers/block/scsi-uclass.c index 3bf026b..86eddfc 100644 --- a/drivers/block/scsi-uclass.c +++ b/drivers/block/scsi-uclass.c @@ -45,6 +45,9 @@ static int scsi_post_bind(struct udevice *dev) { /* Get uclass plat data from fdt */ scsi_ofdata_to_uclass_platdata(dev); + + /* bind subnode devices */ + return dm_scan_fdt_dev(dev); } UCLASS_DRIVER(scsi) = { -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
