I have pushed an update to arm / next. This used the mach-types.h from Russel's cur-git repo.
I did not see zoom3 there so I will need to update this again closer to when I submit the board. If you do not see that board you were looking for either, let me know. I would rather pull this file from the kernel but I am (somewhat) flexible. Tom Nishanth Menon wrote: > On Thu, Oct 22, 2009 at 4:42 PM, Paulraj, Sandeep <s-paul...@ti.com> wrote: >>> Paulraj, Sandeep wrote: >>>> Tom, >>>> >>>> The ARM mach-types.h in /include/asm-arm needs to be updated with what >>> is present at >>>> http://www.arm.linux.org.uk/developer/machines/ >>>> >>>> >>>> Thanks, >>>> Sandeep >>>> _______________________________________________ >>>> U-Boot mailing list >>>> U-Boot@lists.denx.de >>>> http://lists.denx.de/mailman/listinfo/u-boot >>>> >>>> >>> Can you point me to a kernel git commit? >> No at this very moment. > > see http://marc.info/?t=125617384500001&r=1&w=2 >>> Can you verify that it has MACH_TYPE_OMAP_ZOOM3 ? >> Yes. And it had OMAP 3630 >>> I will be submitting this soon :) >>> >>> I will do this over the weekend >>> Thanks, >>> Tom >>> >> I'll look >> > Regards, > Nishanth Menon > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot