On 21/02/17 17:31, Stefano Babic wrote:
>On 21/02/2017 02:56, Ken Lin wrote:
>> Add the delay (10ms) to ensure the clock is stable and to meet the clock-to-
>reset(1ms) requirement recommended in the AR8033 datasheet
>>
>> Signed-off-by: Ken Lin <yungching0...@gmail.com>
>> ---
>> Changes from v1
>> - Fix the missing Signed-off-by issue
>>
>> board/ge/bx50v3/bx50v3.c | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
>> index 2fc1144cda..80b4ba1b8b 100644
>> --- a/board/ge/bx50v3/bx50v3.c
>> +++ b/board/ge/bx50v3/bx50v3.c
>> @@ -103,8 +103,9 @@ static void setup_iomux_enet(void)
>>
>> /* Reset AR8033 PHY */
>> gpio_direction_output(IMX_GPIO_NR(1, 28), 0);
>> - udelay(500);
>> + mdelay(10);
>> gpio_set_value(IMX_GPIO_NR(1, 28), 1);
>> + mdelay(1);
>> }
>>
>> static iomux_v3_cfg_t const usdhc2_pads[] = {
>>
>
>Reviewed-by: Stefano Babic <sba...@denx.de>
Acked-by: Ian Ray <ian....@ge.com>
...
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
