Hi Robert,
On 13 March 2017 at 07:51, <f...@fuz.su> wrote:
> Hello Simon,
>
> CONFIG_BLK is set by default for all Rockchip boards. Turning it off was
> the first thing I tried, but I actually wasn't able to figure out how to
> turn it off at all and was then advised elsewhere that this is probably
> not a good idea either.
This means that you don't have an easy baseline. My suggest would be
to put debugging in the API functions within U-Boot and see if you can
work out where it is going wrong.
Regards,
Simon
>
> Yours,
> Robert Clausecker
>
> On Mon, Mar 13, 2017 at 06:33:16AM -0600, Simon Glass wrote:
>> Hi,
>>
>> On 7 March 2017 at 14:53, <f...@fuz.su> wrote:
>> > Good evening,
>> >
>> > I am trying to port FreeBSD to the ASUS Tinker Board, a computer based
>> > on the Rockchip 3288 SoC. FreeBSD's boot loader (named loader(8)) needs
>> > CONFIG_API to be enabled, but trying to build an U-Boot from trunk with
>> > both CONFIG_API and CONFIG_BLK (as required for Rockchip SoC's?) leads
>> > to the following build failure:
>> >
>> > $ CROSS_COMPILE=arm-none-eabi- gmake tinker-rk3288_defconfig all
>> > ...
>> > CC api/api_storage.o
>> > api/api_storage.c: In function 'dev_read_stor':
>> > api/api_storage.c:334:9: error: 'struct blk_desc' has no member named
>> > 'block_read'
>> > if ((dd->block_read) == NULL) {
>> > ^~
>> > api/api_storage.c:339:11: error: 'struct blk_desc' has no member named
>> > 'block_read'
>> > return dd->block_read(dd, start, len, buf);
>> > ^~
>> > api/api_storage.c:340:1: warning: control reaches end of non-void function
>> > [-Wreturn-type]
>> > }
>> > ^
>> > gmake[2]: *** [scripts/Makefile.build:281: api/api_storage.o] Fehler 1
>> > gmake[1]: *** [Makefile:1229: api] Fehler 2
>> > gmake: *** [Makefile:460: __build_one_by_one] Error 2
>> >
>> > I applied the following fix, but the product doesn't boot. Perhaps
>> > that's not a property of the fix though:
>> >
>> > diff --git a/api/api_storage.c b/api/api_storage.c
>> > index e80818df1c..815ed1128d 100644
>> > --- a/api/api_storage.c
>> > +++ b/api/api_storage.c
>> > @@ -331,10 +331,14 @@ lbasize_t dev_read_stor(void *cookie, void *buf,
>> > lbasize_t len, lbastart_t start
>> > if (!dev_stor_is_valid(type, dd))
>> > return 0;
>> >
>> > +#ifdef CONFIG_BLK
>> > + return blk_dread(dd, start, len, buf);
>> > +#else
>> > if ((dd->block_read) == NULL) {
>> > debugf("no block_read() for device 0x%08x\n", cookie);
>> > return 0;
>> > }
>> >
>> > return dd->block_read(dd, start, len, buf);
>> > +#endif /* defined(CONFIG_BLK) */
>>
>> This fix looks right to me. There may be something else wrong. I have
>> not used API very much but it might be worth checking if the board
>> boots OK without CONFIG_BLK?
>>
>> > }
>> >
>> > Yours,
>> > Robert Clausecker
>> >
>> > --
>> > () ascii ribbon campaign - for an 8-bit clean world
>> > /\ - against html email - against proprietary attachments
>> > _______________________________________________
>> > U-Boot mailing list
>> > U-Boot@lists.denx.de
>> > https://lists.denx.de/listinfo/u-boot
>>
>> Regards,
>> Simon
>
> --
> () ascii ribbon campaign - for an 8-bit clean world
> /\ - against html email - against proprietary attachments
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
