Hi,
Has anyone experience with phy DM8203? On the AT91SAM9263-EK the phy DM9161 is used. But I'd like to use the 2-Port Switch of the DM8203. So far I couldn't get it working. The best result at the moment is a timeout while autonegotiation in U-Boot 1.3.4 based on AT91SAM9263EK. As I found out the Phy Adress for the macb structure is set to 0 while initialisation and both pyhs differ in number of address lines. Regards Matthias
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
