Hi Parbhakar, Thanks a lot for your comments!
> -----Original Message----- > From: Prabhakar Kushwaha > Sent: Tuesday, March 07, 2017 11:20 AM > To: Z.Q. Hou <zhiqiang....@nxp.com>; u-boot@lists.denx.de; > o...@buserror.net; york sun <york....@nxp.com>; > mingkai...@freescale.com; s...@chromium.org; Xiaobo Xie > <xiaobo....@nxp.com> > Cc: Z.Q. Hou <zhiqiang....@nxp.com> > Subject: RE: [U-Boot] [PATCH 2/5] mtd: nand: remove nand size print from > nand_init function > > > > -----Original Message----- > > From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of > > Zhiqiang Hou > > Sent: Friday, March 03, 2017 7:01 PM > > To: u-boot@lists.denx.de; o...@buserror.net; york sun > > <york....@nxp.com>; mingkai...@freescale.com; s...@chromium.org; > Xiaobo > > Xie <xiaobo....@nxp.com> > > Cc: Z.Q. Hou <zhiqiang....@nxp.com> > > Subject: [U-Boot] [PATCH 2/5] mtd: nand: remove nand size print from > > nand_init function > > > > From: Hou Zhiqiang <zhiqiang....@nxp.com> > > > > Add nand_size() function to move the nand size print into initr_nand(). > > Remove nand size print from nand_init() to allow other function to > > call > > nand_init() without printing nand size. > > > > What problem is faced if nand_init() printing NAND size When the nand_init() called by other function than initr_nand(), it will print an isolated size and don't know what's this size for. Thanks, Zhiqiang _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
