This patch fixes an ugly behavior of the IL712 magnetic couplers as used on PLU405. These parts will remember their last state over a power cycle which might cause unwanted behavior.
Signed-off-by: Matthias Fuchs <[email protected]> --- board/esd/plu405/plu405.c | 33 +++++++++++++++++++++++++++++++++ include/configs/PLU405.h | 3 ++- 2 files changed, 35 insertions(+), 1 deletions(-) diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index 1841cda..7e6bf3b 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -45,6 +45,32 @@ const unsigned char fpgadata[] = */ #include "../common/fpga.c" +/* + * generate a short spike on the CAN tx line + * to bring the couplers in sync + */ +void init_coupler(u32 addr) +{ + u8 *ctrl = (u8*)addr; + + /* reset */ + out_8(ctrl, 0x21); + + /* dominant */ + out_8(ctrl + 6, 0x00); + out_8(ctrl + 7, 0x14); + out_8(ctrl + 8, 0xfe); + out_8(ctrl, 0x20); + + /* delay */ + in_8(ctrl); + in_8(ctrl); + in_8(ctrl); + + /* reset */ + out_8(ctrl, 0x21); +} + /* Prototypes */ int gunzip(void *, int, unsigned char *, unsigned long *); @@ -198,6 +224,13 @@ int misc_init_r(void) out_8((void *)DUART1_BA + 1, fctr); /* write FCTR */ out_8((void *)DUART1_BA + 3, 0); /* write LCR */ + /* + * Init magnetic couplers + */ + if (!getenv("noinitcoupler")) { + init_coupler(CAN0_BA); + init_coupler(CAN1_BA); + } return 0; } diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 07fc715..b6740de 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -298,7 +298,8 @@ /* * External Bus Controller (EBC) Setup */ -#define CAN_BA 0xF0000000 /* CAN Base Address */ +#define CAN0_BA 0xF0000000 /* CAN0 Base Address */ +#define CAN1_BA 0xF0000100 /* CAN1 Base Address */ #define DUART0_BA 0xF0000400 /* DUART Base Address */ #define DUART1_BA 0xF0000408 /* DUART Base Address */ #define RTC_BA 0xF0000500 /* RTC Base Address */ -- 1.5.6.3 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
