On Sun, Feb 26, 2017 at 5:22 AM, Icenowy Zheng <icen...@aosc.xyz> wrote: > For AXP PMICs' drivers some functions are needed to provide I/O access > for the PMIC. > > The source file used to be controlled by different AXPxxx_POWER config > option. > > Control the file's compliation via a generic AXP_PMIC_BUS option, and > make all AXPxxx_POWER select this option, to prevent furtherly more and > more AXP PMIC names are added to the Makefile of mach-sunxi. > > Signed-off-by: Icenowy Zheng <icen...@aosc.xyz> > --- > arch/arm/mach-sunxi/Makefile | 6 +----- > drivers/power/Kconfig | 10 ++++++++++ > 2 files changed, 11 insertions(+), 5 deletions(-) > > diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile > index a8bf3a6c64..5767f7643f 100644 > --- a/arch/arm/mach-sunxi/Makefile > +++ b/arch/arm/mach-sunxi/Makefile > @@ -31,11 +31,7 @@ obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o > endif > obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o > > -obj-$(CONFIG_AXP152_POWER) += pmic_bus.o > -obj-$(CONFIG_AXP209_POWER) += pmic_bus.o > -obj-$(CONFIG_AXP221_POWER) += pmic_bus.o > -obj-$(CONFIG_AXP809_POWER) += pmic_bus.o > -obj-$(CONFIG_AXP818_POWER) += pmic_bus.o > +obj-$(CONFIG_AXP_PMIC_BUS) += pmic_bus.o > > ifdef CONFIG_SPL_BUILD > obj-$(CONFIG_MACH_SUN4I) += dram_sun4i.o > diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig > index f2c5629be2..442e33ea30 100644 > --- a/drivers/power/Kconfig > +++ b/drivers/power/Kconfig > @@ -6,6 +6,11 @@ source "drivers/power/pmic/Kconfig" > > source "drivers/power/regulator/Kconfig" > > +config AXP_PMIC_BUS > + bool > + ---help--- > + Select this for code providing PMIC access code for AXP PMICs.
No, better to move this pmic driver to drivers/power or if possible use the existing drivers/power/axp*.c thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/listinfo/u-boot
