Can you try export DTC from this repo if you haven't tried. git://jdl.com/software/dtc.git
On Feb 27, 2017 8:17 PM, "Sébastien Szymanski" < sebastien.szyman...@armadeus.com> wrote: On 02/27/2017 03:38 PM, Jagan Teki wrote: > On Monday 27 February 2017 07:58 PM, Sébastien Szymanski wrote: >> Hello, >> >> On 02/26/2017 12:54 PM, Stefano Babic wrote: >>> On 24/02/2017 11:15, Jagan Teki wrote: >>>> From: Jagan Teki <ja...@amarulasolutions.com> >>>> >>>> Changes for v3: >>>> - Rebase on master >>>> - Fix checkpatch.pl Warnings >>>> - Add IMX6_BMODE_UART macro for uart bootmode >>>> - Remove value assignment in enum, since all enum list is order >>>> >>>> Changes for v3: >>>> - Update IMX6_BMODE_* shift macros with real number instead of bitops >>>> - %s/IMX6_BMODE_SERIAL/IMX6_BMODE_SERIAL_ROM >>>> - Assign enums with numbers so-that it can easy to see same in RM >>>> - Update board MAINTAINERS file with imx6ul-isiot-emmc.dts file >>>> >>>> Changes for v2: >>>> - Rebase on master >>>> - Add Is.IoT eMMC boot patches >>>> - Add few mmc env patches on board >>>> >>>> Jagan Teki (15): >>>> imx6: Add imx6_src_get_boot_mode >>>> imx: spl: Update NAND bootmode detection bit >>>> imx: Use IMX6_BMODE_* macros instead of numericals >>>> imx6: Add src_base structure define macro >>>> imx6: isiotmx6ul: Update SPL board boot order for eMMC >>>> i.MX6UL: isiot: Add eMMC boot support >>>> i.MX6UL: isiot: Add modeboot env via board_late_init >>>> i.MX6UL: isiot: Add mmc_late_init >>>> i.MX6UL: isiot: Switch the mmc env based on devno >>>> arm: dts: imx6qdl-icore-rqs: Add eMMC node >>>> imx6: icorem6_rqs: Update SPL board boot order for eMMC >>>> imx6: icorem6_rqs: Add eMMC boot support >>>> i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init >>>> i.MX6Q: icorem6_rqs: Add mmc_late_init >>>> i.MX6Q: isiot: Switch the mmc env based on devno >>>> >>>> arch/arm/dts/Makefile | 1 + >>>> arch/arm/dts/imx6qdl-icore-rqs.dtsi | 22 ++++++ >>>> arch/arm/dts/imx6ul-isiot-emmc.dts | 77 >>>> +++++++++++++++++++++ >>>> arch/arm/imx-common/init.c | 10 +++ >>>> arch/arm/imx-common/spl.c | 49 ++++++++------ >>>> arch/arm/include/asm/arch-mx6/imx-regs.h | 2 + >>>> arch/arm/include/asm/imx-common/sys_proto.h | 47 +++++++++++++ >>>> board/engicam/icorem6_rqs/icorem6_rqs.c | 96 >>>> +++++++++++++++++++++++++- >>>> board/engicam/isiotmx6ul/MAINTAINERS | 2 + >>>> board/engicam/isiotmx6ul/isiotmx6ul.c | 101 >>>> +++++++++++++++++++++++++++- >>>> configs/imx6dl_icore_rqs_mmc_defconfig | 1 + >>>> configs/imx6q_icore_rqs_mmc_defconfig | 1 + >>>> configs/imx6ul_isiot_emmc_defconfig | 40 +++++++++++ >>>> configs/imx6ul_isiot_mmc_defconfig | 1 + >>>> configs/imx6ul_isiot_nand_defconfig | 1 + >>>> include/configs/imx6qdl_icore_rqs.h | 36 +++++----- >>>> include/configs/imx6ul_isiot.h | 40 +++++------ >>>> 17 files changed, 462 insertions(+), 65 deletions(-) >>>> create mode 100644 arch/arm/dts/imx6ul-isiot-emmc.dts >>>> create mode 100644 configs/imx6ul_isiot_emmc_defconfig >>>> >>> >>> Applied to u-boot-imx, thanks ! >> >> The dts files fail to build: >> >> Error: ./arch/arm/dts/imx6ul-isiot.dtsi:43.1-9 syntax error >> FATAL ERROR: Unable to parse input tree >> scripts/Makefile.lib:322: recipe for target >> 'arch/arm/dts/imx6ul-isiot-mmc.dtb' failed >> make[2]: *** [arch/arm/dts/imx6ul-isiot-mmc.dtb] Error 1 >> make[2]: *** Waiting for unfinished jobs.... >> Error: ./arch/arm/dts/imx6ul-isiot.dtsi:43.1-9 syntax error >> FATAL ERROR: Unable to parse input tree >> scripts/Makefile.lib:322: recipe for target >> 'arch/arm/dts/imx6ul-isiot-emmc.dtb' failed >> make[2]: *** [arch/arm/dts/imx6ul-isiot-emmc.dtb] Error 1 >> Error: ./arch/arm/dts/imx6ul-isiot.dtsi:43.1-9 syntax error >> FATAL ERROR: Unable to parse input tree >> scripts/Makefile.lib:322: recipe for target >> 'arch/arm/dts/imx6ul-isiot-nand.dtb' failed >> make[2]: *** [arch/arm/dts/imx6ul-isiot-nand.dtb] Error 1 >> dts/Makefile:36: recipe for target 'arch-dtbs' failed >> make[1]: *** [arch-dtbs] Error 2 >> Makefile:860: recipe for target 'dts/dt.dtb' failed >> make: *** [dts/dt.dtb] Error 2 >> >> I think that's because there is '/dts-v1/;' in the imx6ul-isiot.dtsi >> file and in imx6ul-isiot-*.dts files. > > What is the dtc version used? mine with > > dtc -v > Version: DTC 1.4.2-gdaa75e8f > > No build issues. > I was using: dtc -v Version: DTC 1.4.1 With DTC.1.4.2, no build issues. Thanks ! > thanks! -- Sébastien Szymanski Software Engineer, Armadeus Systems sebastien.szyman...@armadeus.com Tel: +33 (0)9 72 29 41 44 Fax: +33 (0)9 72 28 79 26 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/listinfo/u-boot