Hello list I took a Linux driver for an Ethernet device and I'm trying to make it work with u-boot.
I'm a little bit lost, so far I've based my work on drivers/net/rtl8139.c because it uses "struct pci_device_id", as my linux driver does, but I have no idea how to know if it's at least trying to detect the device. * I copied that file into newdev.c * Changed the vendor and device ID for the card's and renamed the init function. * Added the newdev.c file in such a way that I can select it from "make menuconfig". * Registered the CONFIG_NEWDEV macro somewhere. * Long story short, I pretty much added a newdev everywhere I saw rtl8139 in the source tree. So far it's building -probably as a module, not sure- if I grep its name in the u-boot* files created I can see 1 occurrence of it followed by a number (it's address?) I added a printf() in the init function I registered in include/net.h (or something like that, I don't have the src at this moment) but I'm not seeing the message, only one error message from net/eth_legacy.c, it's not clear to me the relationship between net/ and drivers/net/. I'm running in a well known hardware simulator. Any advice you can give this newcomer? Thanks in advance -Farfan -- Do not let me induce you to satisfy my curiosity, from an expectation, that I shall gratify yours. What I may judge proper to conceal, does not concern myself alone. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
