The gpll and cpll init values are only used in rk_clk_init in the SPL
and therefore produce compile time warnings in regular uboot builds.
Fix that with an #ifdef.
Signed-off-by: Heiko Stuebner <he...@sntech.de>
---
drivers/clk/rockchip/clk_rk3288.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/clk/rockchip/clk_rk3288.c
b/drivers/clk/rockchip/clk_rk3288.c
index d15504c3aa..78356766a7 100644
--- a/drivers/clk/rockchip/clk_rk3288.c
+++ b/drivers/clk/rockchip/clk_rk3288.c
@@ -131,8 +131,10 @@ enum {
/* Keep divisors as low as possible to reduce jitter and power usage */
static const struct pll_div apll_init_cfg = PLL_DIVISORS(APLL_HZ, 1, 1);
+#ifdef CONFIG_SPL_BUILD
static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2);
static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2);
+#endif
static int rkclk_set_pll(struct rk3288_cru *cru, enum rk_clk_id clk_id,
const struct pll_div *div)
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
