The sun50i platform (e.g. the A64/sun50iw1p1) integrates 2 USB PHYs
which are connected as follows:
  PHY#0 is shared between the OTG controller (MUSB) [at 01C19000]
        and the USB-OTG-HCI [at 01C1A000]
  PHY#1 is dedicated to USB-HCI0 [at 01C1B000] and can be bypassed
        when connecting HCI0 to the HSIC interface

Note that all USB PHYs are controlled from within the OTG address
space at 01C19000.

X-AffectedPlatforms: A64-uQ7
Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
---
 drivers/usb/musb-new/musb_regs.h | 2 +-
 include/configs/sun50i.h         | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/musb-new/musb_regs.h b/drivers/usb/musb-new/musb_regs.h
index 0f18dd7..da474f0 100644
--- a/drivers/usb/musb-new/musb_regs.h
+++ b/drivers/usb/musb-new/musb_regs.h
@@ -434,12 +434,12 @@ static inline u8 musb_read_ulpi_buscontrol(void __iomem 
*mbase)
 
 static inline u8 musb_read_configdata(void __iomem *mbase)
 {
-#if defined CONFIG_MACH_SUN8I_A33 || defined CONFIG_MACH_SUN8I_A83T
+#if defined CONFIG_MACH_SUN8I_A33 || defined CONFIG_MACH_SUN8I_A83T || defined 
CONFIG_MACH_SUN50I
        /* <Sigh> allwinner saves a reg, and we need to hardcode this */
        return 0xde;
 #else
        musb_writeb(mbase, MUSB_INDEX, 0);
        return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
 #endif
 }
 
diff --git a/include/configs/sun50i.h b/include/configs/sun50i.h
index 3e5708b..02888d3 100644
--- a/include/configs/sun50i.h
+++ b/include/configs/sun50i.h
@@ -1,30 +1,30 @@
 /*
  * Configuration settings for the Allwinner A64 (sun50i) CPU
  *
  * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 /*
  * A64 specific configuration
  */
 
 #ifdef CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_SUNXI
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
 #endif
 
-#define CONFIG_SUNXI_USB_PHYS  1
+#define CONFIG_SUNXI_USB_PHYS  2
 
 #define COUNTER_FREQUENCY      CONFIG_TIMER_CLK_FREQ
 #define GICD_BASE              0x1c81000
 #define GICC_BASE              0x1c82000
 
 /*
  * Include common sunxi configuration where most the settings are
  */
 #include <configs/sunxi-common.h>
 
 #endif /* __CONFIG_H */
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to