Hi Kosta,
On 13.02.2017 14:38, kos...@marvell.com wrote:
From: Konstantin Porotchkin <kos...@marvell.com>
Fix the default pin control values in a board-specific
function on early board init stage.
This fix allows the NETA driver to work in RGMII
mode until the full-featured pin control driver gets
introduced.
Signed-off-by: Konstantin Porotchkin <kos...@marvell.com>
Cc: Stefan Roese <s...@denx.de>
Cc: Igal Liberman <ig...@marvell.com>
---
board/Marvell/mvebu_db-88f3720/board.c | 26 +++++++++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/board/Marvell/mvebu_db-88f3720/board.c
b/board/Marvell/mvebu_db-88f3720/board.c
index edf88c7..3337f3f 100644
--- a/board/Marvell/mvebu_db-88f3720/board.c
+++ b/board/Marvell/mvebu_db-88f3720/board.c
@@ -19,9 +19,33 @@ DECLARE_GLOBAL_DATA_PTR;
#define I2C_IO_REG_0_SATA_OFF 2
#define I2C_IO_REG_0_USB_H_OFF 1
+#define PINCTRL_NB_REG_VALUE 0x000173fa
+#define PINCTRL_SB_REG_VALUE 0x00007a23
+
I am aware that this is a temporary solution, but are these values
correct for the A3720-DB or only the ESPRESSBin board?
BTW: You are now using the "Marvell/mvebu_db-88f3720" board directory
for multiple board and not only the A3720-DB. I would prefer to see
a rename of the board directory before this, like we've done to the
A7k/8k directory. What do you think?
int board_early_init_f(void)
{
- /* Nothing to do (yet), perhaps later some pin-muxing etc */
+ const void *blob = gd->fdt_blob;
+ const char *bank_name;
+ const char *compat = "marvell,armada-3700-pinctl";
+ int off, len;
+ void __iomem *addr;
+
+ /* FIXME
+ * Temporary WA for setting correct pin control values
+ * until the real pin control driver is awailable.
+ */
+ off = fdt_node_offset_by_compatible(blob, -1, compat);
+ while (off != -FDT_ERR_NOTFOUND) {
+ bank_name = fdt_getprop(blob, off, "bank-name", &len);
+ addr = (void __iomem *)fdtdec_get_addr_size_auto_noparent(
+ blob, off, "reg", 0, NULL, true);
+ if (!strncmp(bank_name, "armada-3700-nb", len))
+ writel(PINCTRL_NB_REG_VALUE, addr);
+ else if (!strncmp(bank_name, "armada-3700-sb", len))
+ writel(PINCTRL_SB_REG_VALUE, addr);
+
+ off = fdt_node_offset_by_compatible(blob, off, compat);
+ }
return 0;
}
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
