Hi Yegor, On Mon, Feb 13, 2017 at 12:57 PM, Yegor Yefremov <yegorsli...@googlemail.com > wrote:
> My am335x based board doesn't detect USB sticks: > > U-Boot 2017.03-rc1 (Feb 13 2017 - 12:46:54 +0100) > > CPU : AM335X-GP rev 2.1 > I2C: ready > DRAM: 256 MiB > NAND: 256 MiB > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > Using default environment > > Net: <ethaddr> not set. Validating first E-fuse MAC > cpsw > Hit any key to stop autoboot: 0 > => usb reset > resetting USB... > USB0: scanning bus 0 for devices... 2 USB Device(s) found > scanning usb for storage devices... 0 Storage Device(s) found > > > => usb tree > USB device tree: > 1 Hub (480 Mb/s, 100mA) > | USB2.0 Hub > | > +-2 Vendor specific (480 Mb/s, 500mA) > Quectel, Incorporated UMTS/HSPA Module > > U-Boot finds a hub and a 3g modem attached to it, but the USB drive, > that is also attached to this hub won't be detected. > maybe stupid reply but did you test on other board or with other usb device? I can check on BBB in the evening and post findings. > > So far I haven't tried to bisect the issue (have to find a working > commit including my board), but the same setup is working for 2014.07 > u-boot. Am I the only one or are other am335x based also affected? > > Regards, > Yegor > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > BR, marek -- as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite twitter: #opennandra web: http://open-nandra.com _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
