On 27/12/2016 11:04, Peng Fan wrote: > i.MX7ULP is a new series SoC which has different architecture > from previous i.MX platforms. Create a new cpu folder for it, > and add it to Kconfig. > > Signed-off-by: Peng Fan <peng....@nxp.com> > Signed-off-by: Ye Li <ye...@nxp.com> > Cc: Stefano Babic <sba...@denx.de> > --- > > V2: > None > > arch/arm/Kconfig | 7 +++++++ > arch/arm/cpu/armv7/Makefile | 3 ++- > arch/arm/cpu/armv7/mx7ulp/Kconfig | 6 ++++++ > 3 files changed, 15 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/cpu/armv7/mx7ulp/Kconfig > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index d871a45..543027c 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -461,6 +461,11 @@ config ARCH_MESON > targeted at media players and tablet computers. We currently > support the S905 (GXBaby) 64-bit SoC. > > +config ARCH_MX7ULP > + bool "NXP MX7ULP" > + select CPU_V7 > + select ROM_UNIFIED_SECTIONS > + > config ARCH_MX7 > bool "Freescale MX7" > select CPU_V7 > @@ -924,6 +929,8 @@ source "arch/arm/mach-mvebu/Kconfig" > > source "arch/arm/cpu/armv7/ls102xa/Kconfig" > > +source "arch/arm/cpu/armv7/mx7ulp/Kconfig" > + > source "arch/arm/cpu/armv7/mx7/Kconfig" > > source "arch/arm/cpu/armv7/mx6/Kconfig" > diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile > index 0e515a4..02e8778 100644 > --- a/arch/arm/cpu/armv7/Makefile > +++ b/arch/arm/cpu/armv7/Makefile > @@ -12,7 +12,7 @@ obj-y += cache_v7.o cache_v7_asm.o > obj-y += cpu.o cp15.o > obj-y += syslib.o > > -ifneq > ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_MX7)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_ARCH_SUNXI)$(CONFIG_ARCH_SOCFPGA)$(CONFIG_LS102XA),) > +ifneq > ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_MX7)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_ARCH_SUNXI)$(CONFIG_ARCH_SOCFPGA)$(CONFIG_ARCH_MX7ULP)$(CONFIG_LS102XA),) > ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y) > obj-y += lowlevel_init.o > endif > @@ -37,6 +37,7 @@ obj-$(if $(filter ls102xa,$(SOC)),y) += ls102xa/ > obj-$(if $(filter mx5,$(SOC)),y) += mx5/ > obj-$(CONFIG_MX6) += mx6/ > obj-$(CONFIG_MX7) += mx7/ > +obj-$(CONFIG_ARCH_MX7ULP) += mx7ulp/ > obj-$(CONFIG_RMOBILE) += rmobile/ > obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/ > obj-$(CONFIG_ARCH_SUNXI) += sunxi/ > diff --git a/arch/arm/cpu/armv7/mx7ulp/Kconfig > b/arch/arm/cpu/armv7/mx7ulp/Kconfig > new file mode 100644 > index 0000000..85efd6d > --- /dev/null > +++ b/arch/arm/cpu/armv7/mx7ulp/Kconfig > @@ -0,0 +1,6 @@ > +if ARCH_MX7ULP > + > +config SYS_SOC > + default "mx7ulp" > + > +endif >
Reviewed-by : Stefano Babic <sba...@denx.de> Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
