>> >>> On 02/09/2017 02:32 AM, Thomas Schaefer wrote: >>>> Hi York, >>>> >>>> >>>> >>>> When compiling latest u-boot with gcc 6.3 compiler, I get several >>>> 'unused-const-variable' warnings in options.c file of FSL DDR driver. >>>> Affected variables are for (DIMM_SLOTS_PER_CTLR==2) configuration (e.g. >>>> dual_0S[4]) and warnings could be fixed with the patch applied. >>>> >>>> >>>> >>>> What do you think? >>> >>> Thomas, >>> >>> Thanks for bringing it to my attention. I understand GCC 6 may have >>> more warnings. The proposed patch is OK in logic but it increases the >>> size of code unnecessarily. Can you come up with a different fix? >>> >>> I can come back to check after I finish my work on hand. >>> >>> York >> >> Hi York, >> >> not sure if I understand this correctly, but why is code size >> increased when these variables are not defined? I think code size is >> decreased instead as these variables are no longer defined if not needed. >> >> I also don't see a way to achieve this in a different way as the >> variables are defined differently for DDR2, DDR3 and DDR4. >> >>
>Wait a minute, did you generate the patch backward? Your patch shows
>removing "#if CONFIG_DIMM_SLOTS_PER_CTLR==2" which doesn't exist in
>current code. If the logic is reversed, then yes, you are reducing the size.
>Can
>GCC 6 optimize out the unused data? If yes, maybe we can use __maybe_unused
>to get rid of the warning?
>
>York
Oops, you are right, sorry for the confusion. Here's the corrected version:
diff --git a/drivers/ddr/fsl/options.c b/drivers/ddr/fsl/options.c
index d6a8fcb216..d90ed0b6cc 100644
--- a/drivers/ddr/fsl/options.c
+++ b/drivers/ddr/fsl/options.c
@@ -89,6 +89,7 @@ static const struct dynamic_odt single_S[4] = {
{0, 0, 0, 0},
};
+#if (CONFIG_DIMM_SLOTS_PER_CTLR==2)
static const struct dynamic_odt dual_DD[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
@@ -235,6 +236,7 @@ static const struct dynamic_odt dual_0S[4] = {
{0, 0, 0, 0}
};
+#endif
static const struct dynamic_odt odt_unknown[4] = {
{ /* cs0 */
@@ -319,6 +321,7 @@ static const struct dynamic_odt single_S[4] = {
{0, 0, 0, 0},
};
+#if (CONFIG_DIMM_SLOTS_PER_CTLR==2)
static const struct dynamic_odt dual_DD[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
@@ -465,6 +468,7 @@ static const struct dynamic_odt dual_0S[4] = {
{0, 0, 0, 0}
};
+#endif
static const struct dynamic_odt odt_unknown[4] = {
{ /* cs0 */
@@ -529,6 +533,7 @@ static const struct dynamic_odt single_S[4] = {
{0, 0, 0, 0},
};
+#if (CONFIG_DIMM_SLOTS_PER_CTLR==2)
static const struct dynamic_odt dual_DD[4] = {
{ /* cs0 */
FSL_DDR_ODT_OTHER_DIMM,
@@ -676,6 +681,7 @@ static const struct dynamic_odt dual_0S[4] = {
{0, 0, 0, 0}
};
+#endif
static const struct dynamic_odt odt_unknown[4] = {
{ /* cs0 */
Best regards,
Thomas
drivers_ddr_fsl_options.patch
Description: drivers_ddr_fsl_options.patch
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
