Hi Stefan,
On Thu, Feb 9, 2017 at 12:44 AM, Stefan Roese <s...@denx.de> wrote:
> Hi Bin,
>
>
> On 04.02.2017 06:57, Bin Meng wrote:
>>
>> On Mon, Jan 23, 2017 at 10:55 PM, Stefan Roese <s...@denx.de> wrote:
>>>
>>> Without configuring these registers in the SPI controller, the Linux
>>> MTD device driver is not able to correctly read/write to the SPI
>>> NOR chip at all. In fact, the chip is not detected at all.
>>>
>>> Signed-off-by: Stefan Roese <s...@denx.de>
>>> Cc: Bin Meng <bmeng...@gmail.com>
>>> Cc: Simon Glass <s...@chromium.org>
>>> Cc: Jagan Teki <jt...@openedev.com>
>>> ---
>>> v2:
>>> - Moved code into the ICH SPI driver as suggested by Simon and Bin
>>>
>>> drivers/spi/ich.c | 51
>>> +++++++++++++++++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 51 insertions(+)
>>>
>>> diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c
>>> index caf0103dc3..586b4e9024 100644
>>> --- a/drivers/spi/ich.c
>>> +++ b/drivers/spi/ich.c
>>> @@ -18,6 +18,39 @@
>>>
>>> #include "ich.h"
>>>
>>> +#define SPI_OPMENU_0 0x01 /* WRSR: Write Status Register */
>>> +#define SPI_OPTYPE_0 0x01 /* Write, no address */
>>> +
>>> +#define SPI_OPMENU_1 0x02 /* BYPR: Byte Program */
>>> +#define SPI_OPTYPE_1 0x03 /* Write, address required */
>>> +
>>> +#define SPI_OPMENU_2 0x03 /* READ: Read Data */
>>> +#define SPI_OPTYPE_2 0x02 /* Read, address required */
>>> +
>>> +#define SPI_OPMENU_3 0x05 /* RDSR: Read Status Register */
>>> +#define SPI_OPTYPE_3 0x00 /* Read, no address */
>>> +
>>> +#define SPI_OPMENU_4 0x20 /* SE20: Sector Erase 0x20 */
>>> +#define SPI_OPTYPE_4 0x03 /* Write, address required */
>>> +
>>> +#define SPI_OPMENU_5 0x9f /* RDID: Read ID */
>>> +#define SPI_OPTYPE_5 0x00 /* Read, no address */
>>> +
>>> +#define SPI_OPMENU_6 0xd8 /* BED8: Block Erase 0xd8 */
>>> +#define SPI_OPTYPE_6 0x03 /* Write, address required */
>>> +
>>> +#define SPI_OPMENU_7 0x0b /* FAST: Fast Read */
>>> +#define SPI_OPTYPE_7 0x02 /* Read, address required */
>>> +
>>
>>
>> nits: can we move these defines to ich.h?
>
>
> Sure, no problem.
>
>> In ich.h, I see such macros are defined using enum,
>
>
> You are referring to these here?
>
> enum {
> SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0,
> SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1,
> SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2,
> SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3
> };
Yep
>
>> not sure the
>> coding standard here, but I guess we may either follow the enum
>> defines, or use a new patch to convert enum to #defines...
>
>
> I personally prefer #defines in such cases. So if nobody objects,
> I can send a patch to move those enums to defines.
Thanks!
Regards,
Bin
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
