[U-Boot] [PATCH 1/5] imx6: tqma6: implement power_init_board

[Markus Niebel]

From: Markus Niebel <markus.nie...@tq-group.com>

PMIC implements proper I2C bus switching,
implement power_init_board instead handling in
board_late_init.

Signed-off-by: Markus Niebel <markus.nie...@tq-group.com>
---
 board/tqc/tqma6/tqma6.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c
index c8fc95d..59b4a6c 100644
--- a/board/tqc/tqma6/tqma6.c
+++ b/board/tqc/tqma6/tqma6.c
@@ -232,25 +232,27 @@ static const char *tqma6_get_boardname(void)
        };
 }
 
-int board_late_init(void)
+/* setup board specific PMIC */
+int power_init_board(void)
 {
        struct pmic *p;
-       u32 reg;
-
-       setenv("board_name", tqma6_get_boardname());
+       u32 reg, rev;
 
-       /*
-        * configure PFUZE100 PMIC:
-        * TODO: should go to power_init_board if bus switching is
-        * fixed in generic power code
-        */
        power_pfuze100_init(TQMA6_PFUZE100_I2C_BUS);
        p = pmic_get("PFUZE100");
        if (p && !pmic_probe(p)) {
                pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
-               printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
+               pmic_reg_read(p, PFUZE100_REVID, &rev);
+               printf("PMIC: PFUZE100 ID=0x%02x REV=0x%02x\n", reg, rev);
        }
 
+       return 0;
+}
+
+int board_late_init(void)
+{
+       setenv("board_name", tqma6_get_boardname());
+
        tqma6_bb_board_late_init();
 
        return 0;
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot