s-paul...@ti.com wrote: > Tom, > > To the best of my knowledge, the final version of patches for > new boards were submitted after the merge window ended but the > initial versions were submitted before the merge window ended. > Also there are fixes for various compilation warnings. > This pull request will result in 1 new compliation warning. > This is due to SDP 3430 using a deprecated NET driver. > I beleive it is being worked on by Nishanth. Any patch from > him will be on top of the existing SDP 3430 support. > > Thanks, > Sandeep >
I have pulled this into arm/master-sync. Please check to see that all you expect is there. Tom > The following changes since commit 5415337f0746123c75b28044ea487171b79a86a2: > Simon Kagstrom (1): > arm: Correct build with CONFIG_SYS_HUSH_PARSER set > > are available in the git repository at: > > git://git.denx.de/u-boot-ti master > > David Brownell (1): > TI OMAP3 SDP3430: Initial Support > > Nishanth Menon (4): > OMAP3: export enable_gpmc_cs_config to board files > OMAP3: fix warnings when NAND/ONENAND is not used > OMAP3: Fix SDRC init > TI OMAP3: make gpmc_config as const > > Sandeep Paulraj (13): > TI DaVinci DM355: Fix Compilation warning for DM355 EVM > TI DaVinci DM365: Fix Compilation warning for DM365 EVM > TI DaVinci DM646x: Adding initial support for DM6467 EVM > TI: DaVinci: DM355 Leopard board support > TI DaVinci: Maintainer for DM355 and DM365 EVM > TI: OMAP3: Remove SZ_xx references > TI DaVinci DM355: Add Config option for 64 bit Support > TI DaVinci DM365: Add Config option for 64 bit Support > TI DaVinci DVEVM: Add Config option for 64 bit Support > TI DaVinci Sonata: Add Config option for 64 bit Support > TI DaVinci: DM355 Leopard: Fix compilation warning > TI DaVinci: Fix DM6467 EVM Compilation Warning > TI DaVinci: Adding Copyright for DM365 EVM > > Steve Sakoman (2): > TI: OMAP3: Refactors the SM911x driver > OMAP3: Update Overo and Beagle environment > > Tom Rix (1): > Zoom2 Fix serial gpmc setup > > MAINTAINERS | 8 + > MAKEALL | 3 + > Makefile | 9 + > board/davinci/dm355evm/dm355evm.c | 4 +- > board/davinci/dm355leopard/Makefile | 52 ++++ > board/davinci/dm355leopard/config.mk | 6 + > board/davinci/dm355leopard/dm355leopard.c | 98 +++++++ > board/davinci/dm365evm/dm365evm.c | 5 +- > board/davinci/dm6467evm/Makefile | 52 ++++ > board/davinci/dm6467evm/config.mk | 2 + > board/davinci/dm6467evm/dm6467evm.c | 31 +++ > board/logicpd/zoom2/zoom2.c | 5 +- > board/ti/sdp3430/Makefile | 49 ++++ > board/ti/sdp3430/config.mk | 33 +++ > board/ti/sdp3430/sdp.c | 204 ++++++++++++++ > board/ti/sdp3430/sdp.h | 417 > +++++++++++++++++++++++++++++ > cpu/arm_cortexa8/omap3/mem.c | 21 +- > cpu/arm_cortexa8/omap3/sys_info.c | 2 +- > drivers/net/smc911x.c | 12 +- > include/asm-arm/arch-davinci/hardware.h | 2 + > include/asm-arm/arch-omap3/cpu.h | 1 + > include/asm-arm/arch-omap3/mem.h | 8 +- > include/asm-arm/arch-omap3/sys_proto.h | 2 + > include/configs/davinci_dm355evm.h | 1 + > include/configs/davinci_dm355leopard.h | 162 +++++++++++ > include/configs/davinci_dm365evm.h | 2 + > include/configs/davinci_dm6467evm.h | 132 +++++++++ > include/configs/davinci_dvevm.h | 1 + > include/configs/davinci_sonata.h | 1 + > include/configs/devkit8000.h | 15 +- > include/configs/omap3_beagle.h | 42 ++-- > include/configs/omap3_evm.h | 15 +- > include/configs/omap3_overo.h | 42 ++-- > include/configs/omap3_pandora.h | 15 +- > include/configs/omap3_sdp3430.h | 369 +++++++++++++++++++++++++ > include/configs/omap3_zoom1.h | 15 +- > include/configs/omap3_zoom2.h | 15 +- > 37 files changed, 1754 insertions(+), 99 deletions(-) > create mode 100644 board/davinci/dm355leopard/Makefile > create mode 100644 board/davinci/dm355leopard/config.mk > create mode 100644 board/davinci/dm355leopard/dm355leopard.c > create mode 100644 board/davinci/dm6467evm/Makefile > create mode 100644 board/davinci/dm6467evm/config.mk > create mode 100644 board/davinci/dm6467evm/dm6467evm.c > create mode 100644 board/ti/sdp3430/Makefile > create mode 100644 board/ti/sdp3430/config.mk > create mode 100644 board/ti/sdp3430/sdp.c > create mode 100644 board/ti/sdp3430/sdp.h > create mode 100644 include/configs/davinci_dm355leopard.h > create mode 100644 include/configs/davinci_dm6467evm.h > create mode 100644 include/configs/omap3_sdp3430.h _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot