On 01/29/2017 12:05 AM, Dalon Westergreen wrote:
From: Dalon Westergreen <dalon.westergr...@intel.com>
Remove the default environment as it is now in a common
header.
Add the CONFIG_DEFAULT_DEVICE_TREE to the board's defconfig
to set the linux devicetree name.
Signed-off-by: Dalon Westergreen <dalon.westergr...@intel.com>
Acked-by: Marek Vasut <ma...@denx.de>
Acked-by: Dinh Nguyen <dingu...@kernel.org>
---
configs/socfpga_de1_soc_defconfig | 1 +
include/configs/socfpga_de1_soc.h | 19 +------------------
2 files changed, 2 insertions(+), 18 deletions(-)
diff --git a/configs/socfpga_de1_soc_defconfig
b/configs/socfpga_de1_soc_defconfig
index 032deef..d78e8a1 100644
--- a/configs/socfpga_de1_soc_defconfig
+++ b/configs/socfpga_de1_soc_defconfig
@@ -6,6 +6,7 @@ CONFIG_TARGET_SOCFPGA_TERASIC_DE1_SOC=y
CONFIG_SPL_STACK_R_ADDR=0x00800000
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de1_soc"
+CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de1_soc.dtb"
CONFIG_FIT=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
diff --git a/include/configs/socfpga_de1_soc.h
b/include/configs/socfpga_de1_soc.h
index deec647..3142bd1 100644
--- a/include/configs/socfpga_de1_soc.h
+++ b/include/configs/socfpga_de1_soc.h
@@ -18,7 +18,7 @@
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB */
/* Booting Linux */
-#define CONFIG_BOOTFILE "fitImage"
+#define CONFIG_BOOTFILE "zImage"
ok, here you're confusing me. I thought the point of having the crude,
hacky mmcload/mmcboot in bootcmd was because you want to be legacy
compatible. If you're changing the bootfile name, that point is moot.
So at this point, why not just switch to distro boot and extlinux.conf /
efi altogether?
Alex
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
