Doing unaligned reads is not supported on all architectures, use
byte sized reads of the little endian buffer.
Rename off16 to off8, as it reflects the buffer offset in byte
granularity (offset is in entry, i.e. 12 bit, granularity).
Fix a regression introduced in 8d48c92b45aea91e2a2be90f2ed93677e85526f1
Reported-by: Oleksandr Tymoshenko <go...@bluezbox.com>
Signed-off-by: Stefan Brüns <stefan.bru...@rwth-aachen.de>
Tested-by: Oleksandr Tymoshenko <go...@bluezbox.com>
---
fs/fat/fat.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
v2: added parentheses to fix operator precedence
added Tested-by: Oleksandr Tymoshenko <go...@bluezbox.com>
diff --git a/fs/fat/fat.c b/fs/fat/fat.c
index fe899d0442..23ec280071 100644
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -179,7 +179,7 @@ int flush_dirty_fat_buffer(fsdata *mydata)
static __u32 get_fatent(fsdata *mydata, __u32 entry)
{
__u32 bufnum;
- __u32 off16, offset;
+ __u32 offset, off8;
__u32 ret = 0x00;
if (CHECK_CLUST(entry, mydata->fatsize)) {
@@ -242,8 +242,9 @@ static __u32 get_fatent(fsdata *mydata, __u32 entry)
ret = FAT2CPU16(((__u16 *) mydata->fatbuf)[offset]);
break;
case 12:
- off16 = (offset * 3) / 2;
- ret = FAT2CPU16(*(__u16 *)(mydata->fatbuf + off16));
+ off8 = (offset * 3) / 2;
+ /* fatbut + off8 may be unaligned, read in byte granularity */
+ ret = mydata->fatbuf[off8] + (mydata->fatbuf[off8 + 1] << 8);
if (offset & 0x1)
ret >>= 4;
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
