From: Mugunthan V N <mugunthan...@ti.com>

Add support for programmable MAC impedance configuration and
fix typo in DT impedance parameters names.

Signed-off-by: Mugunthan V N <mugunthan...@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.stras...@ti.com>
---
 no functional changes, just cc list corrected

 arch/arm/dts/dra72-evm-revc.dts |  4 ++--
 drivers/net/phy/ti.c            | 31 +++++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/dra72-evm-revc.dts b/arch/arm/dts/dra72-evm-revc.dts
index 5a1bb34..bc814f1 100644
--- a/arch/arm/dts/dra72-evm-revc.dts
+++ b/arch/arm/dts/dra72-evm-revc.dts
@@ -67,7 +67,7 @@
                ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
                ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
                ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-               ti,min-output-imepdance;
+               ti,min-output-impedance;
        };
 
        dp83867_1: ethernet-phy@3 {
@@ -75,6 +75,6 @@
                ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
                ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
                ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-               ti,min-output-imepdance;
+               ti,min-output-impedance;
        };
 };
diff --git a/drivers/net/phy/ti.c b/drivers/net/phy/ti.c
index c55dd97..21b181a 100644
--- a/drivers/net/phy/ti.c
+++ b/drivers/net/phy/ti.c
@@ -27,6 +27,7 @@ DECLARE_GLOBAL_DATA_PTR;
 /* Extended Registers */
 #define DP83867_RGMIICTL       0x0032
 #define DP83867_RGMIIDCTL      0x0086
+#define DP83867_IO_MUX_CFG     0x0170
 
 #define DP83867_SW_RESET       BIT(15)
 #define DP83867_SW_RESTART     BIT(14)
@@ -84,10 +85,17 @@ DECLARE_GLOBAL_DATA_PTR;
 #define DEFAULT_TX_ID_DELAY    DP83867_RGMIIDCTL_2_75_NS
 #define DEFAULT_FIFO_DEPTH     DP83867_PHYCR_FIFO_DEPTH_4_B_NIB
 
+/* IO_MUX_CFG bits */
+#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL   0x1f
+
+#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX    0x0
+#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN    0x1f
+
 struct dp83867_private {
        int rx_id_delay;
        int tx_id_delay;
        int fifo_depth;
+       int io_impedance;
 };
 
 /**
@@ -166,6 +174,15 @@ static int dp83867_of_init(struct phy_device *phydev)
 {
        struct dp83867_private *dp83867 = phydev->priv;
        struct udevice *dev = phydev->dev;
+       int node = dev->of_offset;
+       const void *fdt = gd->fdt_blob;
+
+       if (fdtdec_get_bool(fdt, node, "ti,max-output-impedance"))
+               dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX;
+       else if (fdtdec_get_bool(fdt, node, "ti,min-output-impedance"))
+               dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN;
+       else
+               dp83867->io_impedance = -EINVAL;
 
        dp83867->rx_id_delay = fdtdec_get_uint(gd->fdt_blob, dev->of_offset,
                                 "ti,rx-internal-delay", -1);
@@ -186,6 +203,7 @@ static int dp83867_of_init(struct phy_device *phydev)
        dp83867->rx_id_delay = DEFAULT_RX_ID_DELAY;
        dp83867->tx_id_delay = DEFAULT_TX_ID_DELAY;
        dp83867->fifo_depth = DEFAULT_FIFO_DEPTH;
+       dp83867->io_impedance = -EINVAL;
 
        return 0;
 }
@@ -269,6 +287,19 @@ static int dp83867_config(struct phy_device *phydev)
 
                phy_write_mmd_indirect(phydev, DP83867_RGMIIDCTL,
                                       DP83867_DEVADDR, phydev->addr, delay);
+
+               if (dp83867->io_impedance >= 0) {
+                       val = phy_read_mmd_indirect(phydev,
+                                                   DP83867_IO_MUX_CFG,
+                                                   DP83867_DEVADDR,
+                                                   phydev->addr);
+                       val &= ~DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
+                       val |= dp83867->io_impedance &
+                              DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
+                       phy_write_mmd_indirect(phydev, DP83867_IO_MUX_CFG,
+                                              DP83867_DEVADDR, phydev->addr,
+                                              val);
+               }
        }
 
        genphy_config_aneg(phydev);
-- 
2.10.1.dirty

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to