The Pine64 (as all 64-bit Allwinner boards so far) need to load an ARM Trusted Firmware image beside the actual U-Boot proper. This can now be easily achieved by using the just extended SPL FIT loading support, so enable it in the Pine64 defconfig.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com> --- configs/pine64_plus_defconfig | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig index 2374170..e050800 100644 --- a/configs/pine64_plus_defconfig +++ b/configs/pine64_plus_defconfig @@ -3,9 +3,14 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN50I=y CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus" +CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y CONFIG_SPL=y +CONFIG_FIT=y +CONFIG_SPL_FIT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_OF_LIBFDT=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -- 2.8.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
