Hai, Yes the NAND flash is working fine in linux and i am able to load the filesystem and boot etc. Since our NOR flash is of small size 2MB and the linux kernel needs to be programmed in NAND, I am trying to use the NAND in uboot for saving the kernel and boot the linux kernel from NAND flash
Arun On Wed, Oct 14, 2009 at 2:17 PM, Juergen Beisert <j...@pengutronix.de> wrote: > Arun, > > On Mittwoch, 14. Oktober 2009, R Arun Kumar wrote: > > I am trying to port U-boot 2.0.0 for my custom imx31 board and I am able > > to boot and load linux etc successfully. > > Does Linux work with your the NAND flash? > > > I want to add NAND flash support and it is observed that the NAND flash > is > > been detected but with lot of "Bad erase block messages" > > The first time u-boot-v2 detects this NAND? Or after Linux had at least > used > it one time? Maybe a OOB layout confusion. > > Regards, > jbe > > -- > Pengutronix e.K. | Juergen Beisert > | > Linux Solutions for Science and Industry | Phone: +49-8766-939 228 > | > Vertretung Sued/Muenchen, Germany | Fax: +49-5121-206917-5555 > | > Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de/ | > -- R Arun Kumar +=================================================================+ http://www.paiarunk.net Happy GoAround Way !!!!!!!!!!!!!!!!! "Talk is cheap, Show me the code - LINUS TORVALDS" +=================================================================+
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
