Hi all, I am going to prepare a new U-Boot with a HW which has on board an EON EN29LV160B Flash Memory. As far as I see in the latest U-Boot tree this kind of FLASH is not yet managed but anyhow I found some infos on EON manufacturer into the file u-boot/include/flash.h and more exactly
173 /* Manufacturers inside bank 1 have ids like 0x01xx01xx */ 174 #define EON_MANUFACT 0x011C011C /* EON manuf. ID in D23..D16, D7..D0 */ I have an EON EN29LV160B Flash Memory datasheet and on the Manufacturer ID I have different infos which indicate differente values, as here reported 173 /* Manufacturers inside bank 1 have ids like 0x7Fxx7Fxx */ 174 #define EON_MANUFACT 0x7F1C7F1C /* EON manuf. ID in D23..D16, D7..D0 */ Is this correct? Furthermore, if I would like to add this kind of flash I have to modify, add the flash type/config, the file u-boot/drivers/mtd/jedec_flash.c or u-boot/drivers/mtd/cfi_flash.c Thanks in advance. Best Regards Agostino Sette TechnoLabs Spa S.S. 17 - Località Boschetto CAP 67100 L'Aquila (Italy) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
