Instead of enumerating all SoC families that need that bit set, let's
just express this more clearly: The SMP bits needs to be set on
SMP capable ARMv7 CPUs. It's much easier to Kconfig to express it the
other way round, so we use ! NO_SMP and ! ARM64.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
---
arch/arm/mach-sunxi/board.c | 5 +----
board/sunxi/Kconfig | 6 ++++++
2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 58fbacb..5a63124 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -180,10 +180,7 @@ void s_init(void)
/* No H3 BSP, boot0 seems to not modify SUNXI_SRAMC_BASE + 0x44 */
#endif
-#if defined CONFIG_MACH_SUN6I || \
- defined CONFIG_MACH_SUN7I || \
- defined CONFIG_MACH_SUN8I || \
- defined CONFIG_MACH_SUN9I
+#if !defined(CONFIG_SUNXI_NO_SMP) && !defined(CONFIG_ARM64)
/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
asm volatile(
"mrc p15, 0, r0, c1, c0, 1\n"
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 37b4252..79b6fa7 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -27,6 +27,10 @@ config SPL_POWER_SUPPORT
config SPL_SERIAL_SUPPORT
default y
+config SUNXI_NO_SMP
+ bool
+ default n
+
# Note only one of these may be selected at a time! But hidden choices are
# not supported by Kconfig
config SUNXI_GEN_SUN4I
@@ -50,12 +54,14 @@ choice
config MACH_SUN4I
bool "sun4i (Allwinner A10)"
select CPU_V7
+ select SUNXI_NO_SMP
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
config MACH_SUN5I
bool "sun5i (Allwinner A13)"
select CPU_V7
+ select SUNXI_NO_SMP
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
--
2.8.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
