Hi Sjoerd, On 12 January 2017 at 00:53, Sjoerd Simons <sjoerd.sim...@collabora.co.uk> wrote: > On Wed, 2017-01-11 at 22:08 -0700, Simon Glass wrote: >> Hi, >> >> On 11 January 2017 at 03:46, Romain Perier <romain.perier@collabora.c >> om> wrote: >> > > From Romain: >> > >> > This is a resent of Simon's v4 series. I have changed what was >> > suggested >> > by David Wu about the driver name (rename gmac_rk3288 to >> > gmac_rockchip). >> > I have also tested the whole series on a rock2 square board, >> > updated the >> > configuration files for rock2 board. I have fixed a build failure >> > caused >> > by recent changes in config_distro_defaults (CMD_PXE is no longer >> > enabled, >> > so I enabled DISTRO_DEFAULTS for Rockchip platforms by default). I >> > have also >> > added few Signed-off-by tags. >> >> I have tested this on a gigabit link and it does not work. I wonder >> if >> the clocks are wrong? >> >> However it works fine on 100Mbps which is better than what we have, >> so >> I'm going to apply this. Thank you for your work, Romain. > > Funny, my initial patchset only worked on gigabit due to a wrong phy > clock on 100mbit/s. Hopefully should be an easy fix in a follow-up > patch. Thanks for merging!
Yes, it worked OK for me ages ago when I first tested it, but I did have a different setup. It gives a lot of timeouts for me now. As you say it shouldn't be hard to resolve. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
