On 9 January 2017 at 11:13, Simon Glass <s...@chromium.org> wrote: > On 2 January 2017 at 01:40, Michal Simek <michal.si...@xilinx.com> wrote: >> >> New scan should unbind all block devices not to be listed again. >> Without this patch if scsi reset or scan is called new block devices are >> created which point to the same id and lun. >> >> For example: >> ZynqMP> scsi scan >> scsi_scan: if_type=2, devnum=0: sd...@ff170000.blk, 6, 0 >> scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 0 >> scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 1 >> scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 2 >> scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 3 >> scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 4 >> scanning bus for devices... >> Device 0: (1:0) Vendor: ATA Prod.: KINGSTON SVP200S Rev: 501A >> Type: Hard Disk >> Capacity: 57241.8 MB = 55.9 GB (117231408 x 512) >> >> Reported-by: Ken Ma <m...@marvell.com> >> Signed-off-by: Michal Simek <michal.si...@xilinx.com> >> --- >> >> common/scsi.c | 2 ++ >> 1 file changed, 2 insertions(+) > > Acked-by: Simon Glass <s...@chromium.org>
Applied to u-boot-dm, thanks! _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
