Hi,
Am 25.11.2016 um 19:56 schrieb Breno Lima:
> diff --git a/include/configs/udoo_neo.h b/include/configs/udoo_neo.h
> new file mode 100644
> index 0000000..81e0481
> --- /dev/null
> +++ b/include/configs/udoo_neo.h
[...]
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "console=ttymxc0,115200\0" \
> + "fdt_high=0xffffffff\0" \
> + "initrd_high=0xffffffff\0" \
> + "fdt_file=undefined\0" \
> + "fdt_addr=0x83000000\0" \
This needs to be fdt_addr_r.
=> boot
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
load - load binary file from a filesystem
Usage:
load <interface> [<dev[:part]> [<addr> [<filename> [bytes [pos]]]]]
- Load binary file 'filename' from partition 'part' on device
type 'interface' instance 'dev' to address 'addr' in memory.
'bytes' gives the size to load in bytes.
If 'bytes' is 0 or omitted, the file is read until the end.
'pos' gives the file byte position to start reading from.
If 'pos' is 0 or omitted, the file is read from the start.
BOOTP broadcast 1
...
> + "ip_dyn=yes\0" \
> + "mmcdev=0\0" \
> + "mmcrootfstype=ext4\0" \
> + "mmcautodetect=no\0" \
> + "findfdt="\
> + "if test $board_name = BASIC; then " \
> + "setenv fdt_file imx6sx-udoo-neo-basic.dtb; fi; " \
> + "if test $board_name = BASICKS; then " \
> + "setenv fdt_file imx6sx-udoo-neo-basic.dtb; fi; " \
> + "if test $board_name = FULL; then " \
> + "setenv fdt_file imx6sx-udoo-neo-full.dtb; fi; " \
> + "if test $board_name = EXTENDED; then " \
> + "setenv fdt_file imx6sx-udoo-neo-extended.dtb; fi; " \
> + "if test $fdt_file = UNDEFINED; then " \
> + "echo WARNING: Could not determine dtb to use; fi; \0" \
Nit: Trailing semicolon and space could be dropped.
> + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
> + "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
> + "ramdisk_addr_r=0x83000000\0" \
> + "ramdiskaddr=0x83000000\0" \
Why have a duplicate $ramdiskaddr for a new board?
Regards,
Andreas
> + "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
> + BOOTENV
> +
> +#define BOOT_TARGET_DEVICES(func) \
> + func(MMC, mmc, 0)
> +
> +#define CONFIG_BOOTCOMMAND \
> + "run findfdt; " \
> + "run distro_bootcmd"
> +
> +#include <config_distro_bootcmd.h>
[...]
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
