Dear kevin.morfitt 2009/10/10 kevin.morf...@fearnside-systems.co.uk <kevin.morf...@fearnside-systems.co.uk>: > This patch re-formats the code in cpu/arm920t and cpu/arm920t/23c24x0 in > preparation for changes to add support for the Embest SBC2440-II Board. > > The changes are as follows: > - re-indent the code using Lindent > - make sure register layouts are defined using a C struct > - replace the upper-case typedef'ed C struct names with lower case > non-typedef'ed ones > - make sure registers are accessed using the proper accessor functions > - run checkpatch.pl and fix any error reports > > It assumes the following patch has been applied first: > - [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009 > > Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have > any s3c2400 or s3c2410 boards but need this patch applying before I can submit > patches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets and > no > new warnings or errors were found. > > Signed-off-by: Kevin Morfitt <kevin.morf...@fearnside-systems.co.uk> > --- > > Changes in v2: re-formatted patch to remove line wrapping > Changes in v3: removed checkpatch.pl errors > moved change log > > cpu/arm920t/s3c24x0/interrupts.c | 4 +- > cpu/arm920t/s3c24x0/speed.c | 42 +- > cpu/arm920t/s3c24x0/timer.c | 74 ++- > cpu/arm920t/s3c24x0/usb.c | 30 +- > cpu/arm920t/s3c24x0/usb_ohci.c | 1323 > ++++++++++++++++++++------------------ > cpu/arm920t/s3c24x0/usb_ohci.h | 209 +++--- > cpu/arm920t/start.S | 63 +- > 7 files changed, 915 insertions(+), 830 deletions(-) >
applied to u-boot-samsung Thanks Minkyu Kang -- from. prom. www.promsoft.net _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
