> > On Sun, Oct 11, 2009 at 7:16 AM, Steve Sakoman <sako...@gmail.com> wrote: > > > Compile and run test of the Overo build was fine with Tobi card. > > Later today I will try some of the other daughter cards to make sure > > it works with all of them. > > Heh, I spoke too soon! > > U-boot appeared to run fine, but it fails in it's main mission in life > -- to load & execute the linux kernel. > > Overo hangs after the uncompressing kernel message. > > Steve
That's not good. Can you be kind enough to take a look at all the changes to cpu/arm_cortexa8/omap3/mem.c I am speaking from my DaVinci experience, small mistakes in the DDR timings resulted in similar hangs. And I can see that it has changed http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commitdiff;h=f714f3a12c09260c500e0f7c5ff40f15d66ab579 also this is another commit which affects overro http://git.denx.de/?p=u-boot/u-boot-ti.git;a=commitdiff;h=5f0ae0c1e2b617c8b453d8862c49c06aef29b8f0 Sandeep _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
