This patch adds a missing __bss_size symbol to the default armv8
u-boot-spl.lds file.
Makefile.spl relies on __bss_size to be present when it creates the SPL
image. It uses that symbol to create a pad file that will be used to place
the dtb after the bss section.
In ARMv8 default u-boot-spl.lds, __bss_size was missing and therefore, the
pad file was always 0. As a result, the dtb was placed after
_image_binary_end, which caused a failure when loading it inside the SPL.
Signed-off-by: Oded Gabbay <oded.gab...@gmail.com>
Cc: Albert Aribaud <albert.u.b...@aribaud.net>
---
arch/arm/cpu/armv8/u-boot-spl.lds | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/cpu/armv8/u-boot-spl.lds
b/arch/arm/cpu/armv8/u-boot-spl.lds
index cc427c3..e7799cc 100644
--- a/arch/arm/cpu/armv8/u-boot-spl.lds
+++ b/arch/arm/cpu/armv8/u-boot-spl.lds
@@ -70,6 +70,7 @@ SECTIONS
KEEP(*(.__bss_end));
} >.sdram
+ __bss_size = __bss_end - _image_binary_end;
/DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
