Hi, On 15 December 2016 at 18:21, Jaehoon Chung <jh80.ch...@samsung.com> wrote:
> This patchest is for supporting pmic driver-model on Goni board. > (Goni board is S5PC110.) > > For using that, add the new file as max8998.c for only driver-model. > pmic_max8998.c is remained for legacy. > In future, it might be removed. Instead, max8998 should be used. > > *dm tree > serial [ + ] |-- serial@e2900800 > i2c [ ] `-- i2c-pmic > pmic [ ] `-- pmic@66 > > *dm uclass > uclass 20: i2c > - * i2c-pmic @ 47f6c6d0, seq 3, (req 3) > > uclass 22: i2c_generic > uclass 42: pmic > - * pmic@66 @ 47f6c748, seq 0, (req -1) > > * After using pmic command. > Goni # pmic list > | Name | Parent name | Parent uclass @ > seq > | pmic@66 | i2c-pmic | i2c @ 3 > > Node, it needs to implement the regulator driver for using regulator > framework. > > Jaehoon Chung (3): > power: pmic: add the max8998 controller for DM > arm: dts: s5pc1xx-goni: add the pmic node for using DM > configs: enable the DM_PMIC and DM_I2C_GPIO for max8998 pmic > > arch/arm/dts/s5pc1xx-goni.dts | 165 ++++++++++++++++++++++++++++++ > ++++++++++++ > configs/s5p_goni_defconfig | 3 + > drivers/power/pmic/Kconfig | 7 ++ > drivers/power/pmic/Makefile | 1 + > drivers/power/pmic/max8998.c | 61 ++++++++++++++++ > 5 files changed, 237 insertions(+) > create mode 100644 drivers/power/pmic/max8998.c > > -- > 2.10.2 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > This patchset seems to ready to submit. Who will pick this up? power? DM? or samsang? Thanks, -- from. prom. www.promsoft.net _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
