Dudhat Dipen-B09055 wrote: > > -----Original Message----- > From: Wood Scott-B07421 > Sent: Friday, October 09, 2009 11:48 PM > To: Dudhat Dipen-B09055 > Cc: u-boot@lists.denx.de > Subject: Re: [U-Boot] [PATCH v3 3/3] ppc/p1_p2_RDB: DDR Relocation > supportfor NAND/SD/eSPI Boot > > On Fri, Oct 09, 2009 at 11:12:04PM +0530, Dipen Dudhat wrote: >> DDR support to boot from NAND/eSDHC/eSPI on P1 & P2 RDB platforms. >> Specifically this support needed when L2 Cache size is less than 512K. > > If you're going to use this for eSDHC and eSPI, why is it sitting under > nand_spl? > > To initialize DDR and create LAW in 4K nand_spl code. > Basically this patch adds support of DDR for NAND/eSDHC/eSPI boot on top > of L2 cache support on P1 and P2 RDB Platforms. > > So do I need to split this patch in two parts?? For NAND and > eSDHC/eSPI??
My point is that the DDR stuff is not specific to NAND, it applies to several different boot mechanisms. So just put it the normal board directory. -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
