Hi Maxim, On 16 December 2016 at 17:18, Maxim Sloyko <max...@google.com> wrote: > Greetings, > > I'm working on adding new platform to U-Boot and right now I'm trying > to clean up the directory structure, but running into a problem of > Make not recursing into a subdirectory that I've created. > > in my arch/arm/mach-aspeed/Makefile I have this: > > obj-$(CONFIG_ASPEED_AST2500) += ast2500/ ast2500-board.o > > and then in arch/arm/mach-aspeed/ast2500/Makefile: > > $obj-y += clk_ast2500.o sdram_ast2500.o
What is the $ for? I don't think you want that. > > When I try to build everything, I get this error: > > arm-linux-gnueabi-ld.bfd: cannot find > arch/arm/mach-aspeed/ast2500/built-in.o: No such file or directory > > If instead in arch/arm/mach-aspeed/Makefile I specify: > > obj-$(CONFIG_ASPEED_AST2500) += ast2500/clk_ast2500.o > ast2500/sdram_ast2500.o ast2500-board.o > > (That is, I just added binaries from the lower level dir explicitly) > > everything builds fine, which means that CONFIG_ASPEED_AST2500 is defined. > > Any ideas what might be the problem here? > > If you need more details, you can see the code here > https://github.com/maksymko/u-boot/tree/aspeed_ast2500_evb/arch/arm/mach-aspeed > > Many thanks for the help! > > -- > Maxim Sloyko Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
