The mask for the 88E1510 meant that the 88E1518 code would never be used. Signed-off-by: Phil Edworthy <phil.edwor...@renesas.com> --- Note: This has only been tested on a board that uses a Marvell 88E1512 PHY, see subsequent patches. --- drivers/net/phy/marvell.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 4eeb0f6..06029c0 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -553,7 +553,7 @@ static struct phy_driver M88E1149S_driver = { static struct phy_driver M88E1510_driver = { .name = "Marvell 88E1510", .uid = 0x1410dd0, - .mask = 0xffffff0, + .mask = 0xfffffff, .features = PHY_GBIT_FEATURES, .config = &m88e1510_config, .startup = &m88e1011s_startup, @@ -563,7 +563,7 @@ static struct phy_driver M88E1510_driver = { static struct phy_driver M88E1518_driver = { .name = "Marvell 88E1518", .uid = 0x1410dd1, - .mask = 0xffffff0, + .mask = 0xfffffff, .features = PHY_GBIT_FEATURES, .config = &m88e1518_config, .startup = &m88e1011s_startup, -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot