On Tue, Nov 29, 2016 at 1:58 PM, Phil Edworthy <phil.edwor...@renesas.com> wrote: > This series has fixes, patches to clean the code up, and add support for > specifying the sampling edge. > > Main changes in v3: > 1. Added "spi: cadence_qspi: Use spi mode at the point it is needed" to > address comments for SPI pol/phase code. > 2. "spi: cadence_qspi: Support specifying the sample edge used" has been > split into 3 separate patches. > > > Phil Edworthy (11): > spi: cadence_qspi: Fix clearing of pol/pha bits > spi: cadence_qspi: Fix baud rate calculation > spi: cadence_qspi: Better debug information on the SPI clock rate > spi: cadence_qspi: Use #define for bits instead of bit shifts > spi: cadence_qspi: Clean up the #define names > spi: cadence_qspi: Use spi mode at the point it is needed > spi: cadence_qspi: Remove returns from end of void functions > spi: cadence_qspi: Fix CS timings > spi: cadence_qspi: Move DT prop code to match layout
Applied to u-boot-spi/master thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
