The macro used to select the boot device is not the intended one. It
should be CONFIG_SPL_NAND_LOAD and not CONFIG_SPL_NAND_SIMPLE.
Using the correct config option will help move them to Kconfig option.
Every davinci board that use the SPL are defining both
CONFIG_SPL_NAND_LOAD and CONFIG_SPL_NAND_SIMPLE at the same place, so
there should be no issue created by this change.
Signed-off-by: Fabien Parent <fpar...@baylibre.com>
---
arch/arm/mach-davinci/spl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-davinci/spl.c b/arch/arm/mach-davinci/spl.c
index 0aeaa7d8b7..9d5a173701 100644
--- a/arch/arm/mach-davinci/spl.c
+++ b/arch/arm/mach-davinci/spl.c
@@ -52,7 +52,7 @@ u32 spl_boot_mode(const u32 boot_device)
u32 spl_boot_device(void)
{
-#ifdef CONFIG_SPL_NAND_SIMPLE
+#ifdef CONFIG_SPL_NAND_LOAD
return BOOT_DEVICE_NAND;
#elif defined(CONFIG_SPL_SPI_LOAD)
return BOOT_DEVICE_SPI;
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
