From: Jagan Teki <ja...@amarulasolutions.com> This series support framebuffer and I2C on top of u-boot-imx.git with latest u-boot.git merge.
fec_mxc dm driver on previous version series trigger an issues with when DM_ETH not-defined so, this series have fixes for non-dm builds as well. Changes for v3: - Fix fec_mxc driver to build for non-dm configs as well. - Fix VIDEO_IPV3 Kconfig entry not to make default. Changes for v2: - Rebase on u-boot-imx.git and u-boot.git Jagan Teki (13): net: fec_mxc: Remove unneeded eth_device arg from fec_get_hwaddr net: fec_mxc: Convert into driver model net: fec_mxc: Driver cleanups dm: net: fec: Add .read_rom_hwaddr ARM: dts: imx6qdl-icore: Add FEC support icorem6: Use CONFIG_DM_ETH support video: Kconfig: Add VIDEO_IPV3 entry imx6: icorem6: Add framebuffer support imx6: icorem6: Add custom splashscreen support i2c: Kconfig: Add SYS_I2C_MXC entry i2c: mxc: Print hex instead of decimal for bus address i2c: mxc: Make 'no gpio pinctrl state' print as debug imx6: icorem6: Add I2C support arch/arm/cpu/armv7/mx6/Kconfig | 2 + arch/arm/dts/imx6qdl-icore.dtsi | 24 ++ board/engicam/icorem6/icorem6.c | 184 ++++++++------ configs/imx6qdl_icore_mmc_defconfig | 7 +- configs/imx6qdl_icore_nand_defconfig | 7 +- drivers/i2c/Kconfig | 8 + drivers/i2c/mxc_i2c.c | 2 +- drivers/net/fec_mxc.c | 473 +++++++++++++++++++++++------------ drivers/net/fec_mxc.h | 31 +-- drivers/video/Kconfig | 7 + include/configs/imx6qdl_icore.h | 14 ++ tools/logos/engicam.bmp | Bin 0 -> 60214 bytes 12 files changed, 509 insertions(+), 250 deletions(-) create mode 100755 tools/logos/engicam.bmp -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
