On 12/02/2016 10:24 PM, stefan.herbrechtsme...@weidmueller.de wrote:
> From: Stefan Herbrechtsmeier <stefan.herbrechtsme...@weidmueller.de>
>
> The maximum supported peripheral clock frequency of the zynq depends on
> the IO routing. The MIO and EMIO support a maximum frequency of 50 MHz
> respectively 25 MHz. Use the max-frequency value of the device tree to
> determine the maximal supported peripheral clock frequency.
>
> Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsme...@weidmueller.de>
> Acked-by: Michal Simek <michal.si...@xilinx.com>
Even if this patch is delegated to Michal, i picked to this.
Applied on u-boot-mmc.
Best Regards,
Jaehoon Chung
>
> ---
>
> Changes in v3: None
> Changes in v2: None
>
> drivers/mmc/zynq_sdhci.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
> index 26bd1be..4d2f0b5 100644
> --- a/drivers/mmc/zynq_sdhci.c
> +++ b/drivers/mmc/zynq_sdhci.c
> @@ -16,6 +16,8 @@
>
> #include <asm/arch/clk.h>
>
> +DECLARE_GLOBAL_DATA_PTR;
> +
> #ifndef CONFIG_ZYNQ_SDHCI_MIN_FREQ
> # define CONFIG_ZYNQ_SDHCI_MIN_FREQ 0
> #endif
> @@ -23,6 +25,7 @@
> struct arasan_sdhci_plat {
> struct mmc_config cfg;
> struct mmc mmc;
> + unsigned int f_max;
> };
>
> static int arasan_sdhci_probe(struct udevice *dev)
> @@ -67,7 +70,7 @@ static int arasan_sdhci_probe(struct udevice *dev)
>
> host->max_clk = clock;
>
> - ret = sdhci_setup_cfg(&plat->cfg, host, CONFIG_ZYNQ_SDHCI_MAX_FREQ,
> + ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max,
> CONFIG_ZYNQ_SDHCI_MIN_FREQ);
> host->mmc = &plat->mmc;
> if (ret)
> @@ -81,11 +84,15 @@ static int arasan_sdhci_probe(struct udevice *dev)
>
> static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
> {
> + struct arasan_sdhci_plat *plat = dev_get_platdata(dev);
> struct sdhci_host *host = dev_get_priv(dev);
>
> host->name = dev->name;
> host->ioaddr = (void *)dev_get_addr(dev);
>
> + plat->f_max = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
> + "max-frequency", CONFIG_ZYNQ_SDHCI_MAX_FREQ);
> +
> return 0;
> }
>
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
