Hi Fabio, On 02/12/2016 20:05, Fabio Estevam wrote: > On Fri, Dec 2, 2016 at 3:16 PM, Marcin Niestroj > <m.niest...@grinn-global.com> wrote: > >>> If you took the assumption that in "BOOT_DEVICE_MMC1 = Boot from SDHC1 >>> port" in 54e4fcfa3c749a78 ("ARM: mx6: add MMC2 boot device detection >>> support in SPL") I suggest we need to revert it. >>> >> >> Indeed it was my assumption. I agree it should be reverted then. > > Thanks for confirming. > > Stefano, would you like to take Breno's original patch with the > revert?
I think it is ok to take Breno's original patch. It was just a misunderstanding and how boot device order is set was cleared in this thread. Best regards, Stefano Babic > Or would you like me to resend it with an improved commit log > explaining the reason for the breakage? > >> So to support booting from two SD/MMC devices one should create >> board_boot_order() function? That way BOOT_CFG2[3:4] can be read there >> to figure out which MMC1 or MMC2 should be configured as the first boot >> device. > > If you want to determine the SD/MMC port dynamically it seems like a solution. > > Or if you always know the SD/MMC port you will boot from then you can > simply register the associated SDHC port first. > -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot