On 11/30/2016 11:51 PM, Chris Packham wrote: > (adding York) > > On Thu, Dec 1, 2016 at 4:20 PM, Tony O'Brien > <tony.obr...@alliedtelesis.co.nz> wrote: >> The read-only-write-enable bit is set by default and must be cleared >> to prevent overwriting read-only registers. This should be done >> immediately after resetting the PCI Express controller. >> >> Reviewed-by: Hamish Martin <hamish.mar...@alliedtelesis.co.nz> >> >> --- >> Note that this does not implement the whole fix for this erratum, >> just what is necessary for our implementation. Since we are using a >> fixed RC configuration, no support has been added for EP mode or any >> consideration of link-up/down events. >> >> Signed-off-by: Tony O'Brien <tony.obr...@alliedtelesis.co.nz> >> --- >> arch/powerpc/cpu/mpc85xx/cmd_errata.c | 3 +++ >> arch/powerpc/include/asm/config_mpc85xx.h | 1 + >> arch/powerpc/include/asm/fsl_pci.h | 4 +++- >> drivers/pci/fsl_pci_init.c | 7 +++++++ >> 4 files changed, 14 insertions(+), 1 deletion(-) >> >> diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c >> b/arch/powerpc/cpu/mpc85xx/cmd_errata.c >> index 402a1ff..aabb56b 100644 >> --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c >> +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c >> @@ -330,6 +330,9 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int >> argc, char * const argv[]) >> #ifdef CONFIG_SYS_FSL_ERRATUM_A009663 >> puts("Work-around for Erratum A009663 enabled\n"); >> #endif >> +#ifdef CONFIG_SYS_FSL_ERRATUM_A007815 >> + puts("Work-around for Erratum A007815 enabled\n"); >> +#endif >> >> return 0; >> } >> diff --git a/arch/powerpc/include/asm/config_mpc85xx.h >> b/arch/powerpc/include/asm/config_mpc85xx.h >> index c92bc1e..c298e44 100644 >> --- a/arch/powerpc/include/asm/config_mpc85xx.h >> +++ b/arch/powerpc/include/asm/config_mpc85xx.h >> @@ -785,6 +785,7 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013) >> #define CONFIG_SYS_FSL_ERRATUM_A006593 >> #define CONFIG_SYS_FSL_ERRATUM_A007186 >> #define CONFIG_SYS_FSL_ERRATUM_A006379 >> +#define CONFIG_SYS_FSL_ERRATUM_A007815 >> #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE >> #define CONFIG_SYS_FSL_SFP_VER_3_0 >>
Tony, The signed-off signature should be above the --- line. Mingkai, Please review this implementation. This erratum applies to T4240, T2080, LS1021A. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot