The default AIS image generated contains the SPL, but the latter is not able to load u-boot because the NAND configuration is missing. This series adds SPL NAND boot support and results in the AIS image that is generated able to boot from NAND.
Fabien Parent (6): NAND: davinci: add support for NAND chips with 16 bits bus davinci: omapl138_lcdk: use correct define for 16 bit NAND chips davinci: omapl138_lcdk: use correct name for CONFIG_SYS_NAND_MASK_CLE davinci: omapl138_lcdk: use correct name for CONFIG_SYS_NAND_MASK_ALE davinci: omapl138_lck: remove obsolete define davinci: omapl138_lcdk: add NAND SPL boot support board/davinci/da8xxevm/README.omapl138-lcdk | 28 ------------------------ configs/omapl138_lcdk_defconfig | 3 +++ drivers/mtd/nand/davinci_nand.c | 3 +++ include/configs/omapl138_lcdk.h | 34 +++++++++++++++++++++++++---- scripts/config_whitelist.txt | 3 --- 5 files changed, 36 insertions(+), 35 deletions(-) delete mode 100644 board/davinci/da8xxevm/README.omapl138-lcdk -- 2.10.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
